From 9b9b88968db9d5cd1624c072bcc5b6818f409100 Mon Sep 17 00:00:00 2001 From: moonanjum26 Date: Thu, 9 Aug 2018 18:18:05 +0530 Subject: [PATCH] remove --- src/firmware/IAD_v2_4_AIO.ino | 479 --------- src/matlab/IAD_v_2_3.fig | Bin 14029 -> 0 bytes src/matlab/IAD_v_2_3.m | 1213 ---------------------- src/python/0.jpg | Bin 7125 -> 0 bytes src/python/pyuic5.bat | 1 - src/python/slide_scanner_gui.py | 399 ------- src/python/slide_scanner_test.py | 419 -------- src/python/slide_scanner_test.pyc | Bin 11967 -> 0 bytes src/python/slide_scanner_test.qml | 111 -- src/python/slide_scanner_test.qmlproject | 20 - src/python/slide_scanner_test.ui | 986 ------------------ src/python/toQImage.py | 27 - src/python/toQImage.pyc | Bin 1307 -> 0 bytes 13 files changed, 3655 deletions(-) delete mode 100644 src/firmware/IAD_v2_4_AIO.ino delete mode 100644 src/matlab/IAD_v_2_3.fig delete mode 100644 src/matlab/IAD_v_2_3.m delete mode 100644 src/python/0.jpg delete mode 100644 src/python/pyuic5.bat delete mode 100644 src/python/slide_scanner_gui.py delete mode 100644 src/python/slide_scanner_test.py delete mode 100644 src/python/slide_scanner_test.pyc delete mode 100644 src/python/slide_scanner_test.qml delete mode 100644 src/python/slide_scanner_test.qmlproject delete mode 100644 src/python/slide_scanner_test.ui delete mode 100644 src/python/toQImage.py delete mode 100644 src/python/toQImage.pyc diff --git a/src/firmware/IAD_v2_4_AIO.ino b/src/firmware/IAD_v2_4_AIO.ino deleted file mode 100644 index 7f32eff..0000000 --- a/src/firmware/IAD_v2_4_AIO.ino +++ /dev/null @@ -1,479 +0,0 @@ -#include - -#define Xdir 13 -#define Ydir 12 -#define Zdir 11 - -#define Ybump 32 -#define Xbump 36 -#define AFbump 28 -#define bumpGnd 42 - -/*************************************************************************************** -This is what matters when you change the Step size : change the FoV accordingly -Rest of everything is calculated in terms of steps only -So the GUI needs to take care of step size to um conversion -***************************************************************************************/ -// FoV size. This is in steps. Calcuated as FoV (steps) = FoV (um) / stepSize -// The step size as on 27 June is 198 nm / step -long xFoV = 1843, yFoV = 2323; - -long XMaxStep=260000L, YMaxStep=130000L, ZMaxStep=30000L; -long limitTOZfocus = 31000L,limitToXZero=-250000,limitToYZero=4000; - -// steps to go before stopping -int trayOutNoiseMargin = 50; - -long XcurrStep=0L, YcurrStep=0L, ZcurrStep=0L; -long Ax=0L,Ay=0L,Az=0L,Bx=0L,By=0L,Bz=0L,Cx=0L,Cy=0L,Cz=0L; -long nextZstep = 0, XdeltaZperFoV=0, YdeltaZperFoV=0; -int needtocheckXmovement=0,needtocheckYmovement=0,needtocheckZmovement=0; - -void setup() { - Serial.begin(57600); - // pulse : X,Y,Z :: TX 1,2,3 - Serial1.begin(38400); Serial2.begin(38400); Serial3.begin(38400); - pinMode(Zdir,OUTPUT); pinMode(Ydir,OUTPUT); pinMode(Xdir,OUTPUT); - pinMode(Xbump,INPUT); pinMode(Ybump,INPUT); pinMode(AFbump,INPUT); // The bump switchs - pinMode(bumpGnd,OUTPUT); digitalWrite(bumpGnd,LOW); // this sets the gnd for the bump switches - -} - -void loop() { - - int choice = Serial.read(); - - switch(choice){ - case('T') : digitalWrite(Zdir,LOW); delayMicroseconds(10); doZSteps(1); ZcurrStep=ZcurrStep-1; // T == Z up by 5 counts - break; - case('G') : digitalWrite(Zdir,HIGH); delayMicroseconds(10); doZSteps(1); ZcurrStep=ZcurrStep+1; // G == Z down - break; - case('A') : needtocheckXmovement=1; digitalWrite(Xdir,LOW); delayMicroseconds(10); doXSteps(xFoV/5); XcurrStep=XcurrStep+xFoV; // A == X up by 1 FoV - break; - case('D') : needtocheckXmovement=0; digitalWrite(Xdir,HIGH); delayMicroseconds(10); doXSteps(xFoV/5); XcurrStep=XcurrStep-xFoV; // D == X down by 1 FoV - break; - case('W') : needtocheckYmovement=0; digitalWrite(Ydir,LOW); delayMicroseconds(10); doYSteps(yFoV/5); YcurrStep=YcurrStep+yFoV; // W == Y up - break; - case('S') : needtocheckYmovement=1; digitalWrite(Ydir,HIGH); delayMicroseconds(10); doYSteps(yFoV/5); YcurrStep=YcurrStep-yFoV; // S == Y down - break; - case('J') : XcurrStep = 0; // J == X reset - break; - case('K') : YcurrStep = 0; // K == Y reset - break; - case('L') : ZcurrStep = 0; // L == Z reset - break; - case('B') : gotoXSetStep(getStep()); - break; - case('N') : gotoYSetStep(getStep()); - break; - case('M') : gotoZSetStep(getStep()); - break; - case('I') : Serial1.flush(); Serial.print('X'); Serial.print("#"); Serial.print(XcurrStep); Serial.print("#"); - break; - case('O') : Serial2.flush(); Serial.print('Y'); Serial.print("#"); Serial.print(YcurrStep); Serial.print("#"); - break; - case('P') : Serial3.flush(); Serial.print('Z');Serial.print("#"); Serial.print(ZcurrStep); Serial.print("#"); - break; - - // Set A,B,C - Codes are E,R,Y respectively - case('E') : Ax=XcurrStep; Ay=YcurrStep; Az=ZcurrStep; - break; - case('R') : Bx=XcurrStep; By=YcurrStep; Bz=ZcurrStep; - break; - case('Y') : Cx=XcurrStep; Cy=YcurrStep; Cz=ZcurrStep; - break; - case('U') : - break; - case('Z') : do4ptArea(); - break; - case('X') : - break; - case('C') : // linear scan - doAtoB(); - break; - case('V') : debug(); - break; - case('Q') : gohome(); - break; - case('F') : doFullArea(); - break; - - case('H') : gotoZSetStep(0); - // Signal that ready to AF now - Serial.print("H#"); - break; - case('1') : tray_out(); - break; - case('2') : tray_in(); - break; - case('0') : EEPROM.write(0,0); - break; - case('7') : Serial.print('7'); Serial.print("#"); - break; - case('3') : digitalWrite(Zdir,HIGH); delayMicroseconds(10); Serial3.print("X"); ZcurrStep=ZcurrStep+1; - break; - case('5') : digitalWrite(Zdir,LOW); delayMicroseconds(10); Serial3.print("X"); ZcurrStep=ZcurrStep-1; - break; - case('.'): // this is the travel sync option. First go 20 k steps and note time - Serial.print('0'); Serial.print("#"); gotoXSetStep(XcurrStep+20000); Serial.print('1'); Serial.print("#"); - Serial.print('2'); Serial.print("#"); gotoXSetStep(XcurrStep-20000); Serial.print('3'); Serial.print("#"); - Serial.print('4'); Serial.print("#"); gotoYSetStep(YcurrStep+20000); Serial.print('5'); Serial.print("#"); - Serial.print('6'); Serial.print("#"); gotoYSetStep(YcurrStep-20000); Serial.print('7'); Serial.print("#"); - default : break; - } -} - - -void doXSteps(long num) { while (num > 0 ) { - if( (needtocheckXmovement==1) && (digitalRead(Xbump) == LOW)) { XcurrStep=0; return;} // DO NOT MOVE IF ALREADY AT LIMIT - Serial1.print("U"); num--; } } - -void doYSteps(long num) { while (num > 0 ) { - if( (needtocheckYmovement==1) && (digitalRead(Ybump) == LOW)) { YcurrStep=0; return;} // DO NOT MOVE IF ALREADY AT LIMIT - Serial2.print("U"); num--; } } - -void doZSteps(long num) { while (num > 0 ) { - if( (needtocheckZmovement==1) && (digitalRead(AFbump) == LOW)) { ZcurrStep=0; return;} // DO NOT MOVE IF ALREADY AT LIMIT - Serial3.print("@"); num--; } } - -long getStep() -{ - long index = 0, inpStep[7]={0,0,0,0,0,0,0}, invalidInput = 0; - long setStep = 0L; - - - for(index=0; index<8; index++ ) - { - while ( Serial.available() < 1 ); - inpStep[index] = Serial.read() - 48; - } - - // DISCARD first byte : MATLAB sends the terminator character there. We need it since if we turn it off, MATALB won't read the Tx from this arduino - // ALSO igmore the second byte : that's the sign symbol - setStep = (inpStep[2]*100000) + (inpStep[3]*10000) + (inpStep[4]*1000) + (inpStep[5]*100) + (inpStep[6]*10) + (inpStep[7]*1) + 0L ; - - // check what sign was sent. If it was anything other than a '-' then dont worry - if (inpStep[1] + 48 == '-' ) { setStep = setStep*(-1); } - - return setStep; -} - -void gotoXSetStep(long XsetStep) -{ - if(XsetStep > XMaxStep) {XsetStep=XMaxStep;} - long stepstodo = abs(XsetStep - XcurrStep) / 5; - - if (XsetStep > XcurrStep) - { needtocheckXmovement=1 ; - digitalWrite(Xdir,LOW); delayMicroseconds(10); XcurrStep=XsetStep; doXSteps( stepstodo ); } - - if (XsetStep < XcurrStep) - { needtocheckXmovement=0 ; - digitalWrite(Xdir,HIGH); delayMicroseconds(10); XcurrStep=XsetStep; doXSteps( stepstodo ); } - -} - -void gotoYSetStep(long YsetStep) -{ - if(YsetStep > YMaxStep) {YsetStep = YMaxStep;} - long stepstodo = abs(YsetStep - YcurrStep) / 5; - - if (YsetStep > YcurrStep) - { needtocheckYmovement=0 ; - digitalWrite(Ydir,LOW); delayMicroseconds(10); YcurrStep=YsetStep; doYSteps( stepstodo ); } - - if (YsetStep < YcurrStep) - { - needtocheckYmovement=1 ; - digitalWrite(Ydir,HIGH); delayMicroseconds(10); YcurrStep=YsetStep; doYSteps( stepstodo ); } - -} - -void gotoZSetStep(long ZsetStep) -{ - //if(ZsetStep > ZMaxStep) {ZsetStep = ZMaxStep;} - long stepstodo = abs(ZsetStep - ZcurrStep) / 5; - - if (ZsetStep > ZcurrStep) - { needtocheckZmovement=0 ; - digitalWrite(Zdir,HIGH); delayMicroseconds(10); ZcurrStep=ZsetStep; doZSteps( stepstodo ); } - - if (ZsetStep < ZcurrStep) - { - needtocheckZmovement=1 ; - digitalWrite(Zdir,LOW); delayMicroseconds(10); ZcurrStep=ZsetStep; doZSteps( stepstodo ); } - -} - -void tray_out () -{/* - // if already tray out then skip this - //if (EEPROM.read(0) == 1) { return; } - // var to even out electric noise - int Xnoise=0, Ynoise=0, Znoise=0; - // x & y out - digitalWrite(Xdir,HIGH); digitalWrite(Ydir,HIGH); digitalWrite(Zdir,HIGH); delayMicroseconds(20); - - while ( Znoise < trayOutNoiseMargin ) - { - Serial1.print("U"); - if (digitalRead(AFbump) == HIGH) { Znoise++; } - } - - digitalWrite(Zdir,LOW); - for (int i=0; i<2000;i++) - { Serial1.print("U"); } - - - while ( Xnoise < trayOutNoiseMargin ) - { - Serial2.print("U"); - if (digitalRead(Xbump) == HIGH) { Xnoise++; } - } - - for (int i=0; i<5000;i++) - { Serial2.print("U"); } - - while ( Ynoise < trayOutNoiseMargin ) - { - Serial3.print("U"); - if (digitalRead(Ybump) == LOW) { Ynoise++; } - } - -// if all done, store this in EEPROM -//EEPROM.write(0,1); -*/ - -Serial.println("Tray out"); -} - -void tray_in() -{ -// assuming that it is called only after tray_out - // gotoXSetStep(125000); - //gotoYSetStep(-40000); - // gotoZSetStep(-3000); - - // now that we're at position, reset counts - //XcurrStep=0L; YcurrStep=0L; ZcurrStep=0L; - - // and the tray in var - // EEPROM.write(0,0); - } - - -void doFullArea() -{ - // calculate num of x & y FoV. And the tilts - long XstepCount = 252525 ; long numXsteps = (XstepCount / xFoV) ; long YstepCount = 126260 ; long numYsteps = (YstepCount / yFoV) ; - - /* The equations are - * Az = {Tx(Ax-Bx)} + {Ty(Ay-By)} + {Bz} - * and - * Az = {Tx(Ax-Cx)} + {Ty(Ay-Cy)} + {Cz} - * - * we can find Tx and Ty after some algebra - * After Tx and Ty, we can find Oz too - */ -long a = (round)( (Ax-Bx) / (float)xFoV); long b = (round)((Ay-By)/(float)yFoV); long c = (Az-Bz); -long d = (round)((Ax-Cx)/(float)xFoV); long e = (round)((Ay-Cy)/(float)yFoV); long f =(Az-Cz); -long Oz = 0L; - -XdeltaZperFoV = (round) ((c*e)-(b*f)) / (float) ((a*e)-(b*d)) ; -YdeltaZperFoV = (round) (c-(a*XdeltaZperFoV)) / (float) b ; -Oz = Az - (XdeltaZperFoV *(Ax/xFoV)) - (YdeltaZperFoV * (Ay/yFoV)); - -// Tilts calculated. Now go ahead with WSI ************************************************************** -// set the initial delta z to the x one. Later, in the loop, it will be changed continously -long deltaZperFoV = XdeltaZperFoV; - -//this var keeps track of xdir while scanning . +1 is inc., -1 is dec -long XtravelDir = 1; - -// go to the origin - gotoXSetStep(0); gotoYSetStep(0); gotoZSetStep(Oz); - delay(300); - -// Send sync signal to the imager. By now we're starting FoV and this will be immediately imaged. - Serial.print("S#"); - -// go go go - for (long trackY = 0; trackY <= numYsteps; trackY++) - { - for (long trackX = 0; trackX < numXsteps; trackX++) - { - gotoXSetStep(XcurrStep + (XtravelDir * xFoV)); - - /* Four cases now --- (a) we're at 1st fov : dont move Z ! - * --- (b)we're on first strip but more than 1st fov : keep adding X tilt - * --- (c) we're at end of strip and just moved to next strip : only add the Y tilt - * --- (d) we're in 2nd or higher strip : keep adding only X tilt (Y tilt already added at (c)) - */ - - if((trackX==0)&&(trackY==0)) { nextZstep = ZcurrStep; } - if((trackX>0)&&(trackY==0)) { nextZstep = ZcurrStep +(XtravelDir * deltaZperFoV); } - if((trackX==0)&&(trackY>0)) { nextZstep = ZcurrStep + YdeltaZperFoV;} - if((trackX>0)&&(trackY>0)) { nextZstep = ZcurrStep +(XtravelDir * deltaZperFoV); } - - gotoZSetStep(nextZstep); - - } - - // shift in the Y dir - gotoYSetStep(YcurrStep + yFoV); - - // now go in the opposite direction - XtravelDir = XtravelDir * -1; - } - - // All done. Now go back to ORIGIN - gotoXSetStep(0); gotoYSetStep(0); gotoZSetStep(0); - delay(300); -} - - -//88888888888888888888888888888888888888888888888888888888888888888 -// THIS IS THE GOHOME() FUNCTION -//88888888888888888888888888888888888888888888888888888888888888888 -void gohome() -{ -// turn on all lights -gotoYSetStep(-300000); gotoXSetStep(400000); -Serial1.flush(); Serial.print('X'); Serial.print("#"); Serial.print(XcurrStep); Serial.print("#"); -// Y already at origin. Need to bring X and Z there - -gotoXSetStep(limitToXZero); gotoYSetStep(limitToYZero); - -gotoZSetStep(-100000); gotoZSetStep(limitTOZfocus); - -// SET THIS AS ORIGIN -XcurrStep=0L; YcurrStep=0L; ZcurrStep=0L; -// all done now. Send sync signal - Serial.print("S#"); -} - -void debug() -{ - -// calc steps in X -long XstepCount = abs(Bx - Ax) ; long numXsteps = (XstepCount / xFoV) ; - -// calc steps in Y -long YstepCount = abs(Cy - By) ; long numYsteps = (YstepCount / yFoV) ; - -// calc the z changes -long XZdeltaCount = Bz - Az ; long XdeltaZperFoV = XZdeltaCount / (numXsteps-1); -long YZdeltaCount = Cz - Bz ; long YdeltaZperFoV = YZdeltaCount / (numYsteps-1); - -// set the initial delta z to the x one. Later, in the loop, it will be changed continously -long deltaZperFoV = XdeltaZperFoV; - -Serial.print(" Ax: ");Serial.print(Ax);Serial.print(" Ay: ");Serial.print(Ay);Serial.print(" Az: ");Serial.print(Az); -Serial.print(" Bx: ");Serial.print(Bx);Serial.print(" By: ");Serial.print(By);Serial.print(" Bz: ");Serial.print(Bz); -Serial.print(" Cx: ");Serial.print(Cx);Serial.print(" Cy: ");Serial.print(Cy);Serial.print(" Cz: ");Serial.print(Cz); -Serial.print(" XdeltaZperFoV: ");Serial.print(XdeltaZperFoV); -Serial.print(" YdeltaZperFoV: ");Serial.print(YdeltaZperFoV); -Serial.print("#"); - -} - -void do4ptArea() -{ -// calc steps in X -long XstepCount = abs(Bx - Ax) ; long numXsteps = (XstepCount / xFoV) ; - -// calc steps in Y -long YstepCount = abs(Cy - By) ; long numYsteps = (YstepCount / yFoV) ; - -// calc the z changes -long XZdeltaCount = Bz - Az ; long XdeltaZperFoV = XZdeltaCount / (numXsteps-1); -long YZdeltaCount = Cz - Bz ; long YdeltaZperFoV = YZdeltaCount / (numYsteps-1); - -// set the initial delta z to the x one. Later, in the loop, it will be changed continously -long deltaZperFoV = XdeltaZperFoV; - -//this var keeps track of xdir while scanning . +1 is inc., -1 is dec -long XtravelDir = 1; - -// go to the origin - gotoXSetStep(Ax); gotoYSetStep(Ay); gotoZSetStep(Az); - delay(300); - -// Send sync signal to the imager - Serial.print("S#"); -// go go go - for (long trackY = 0; trackY <= numYsteps; trackY++) - { - for (long trackX = 0; trackX < numXsteps; trackX++) - { - gotoXSetStep(XcurrStep + (XtravelDir * xFoV)); - - /* Four cases now --- (a) we're at 1st fov : dont move Z ! - * --- (b)we're on first strip but more than 1st fov : keep adding X tilt - * --- (c) we're at end of strip and just moved to next strip : only add the Y tilt - * --- (d) we're in 2nd or higher strip : keep adding only X tilt (Y tilt already added at (c)) - */ - - if((trackX==0)&&(trackY==0)) { nextZstep = ZcurrStep; } - if((trackX>0)&&(trackY==0)) { nextZstep = ZcurrStep +(XtravelDir * deltaZperFoV); } - if((trackX==0)&&(trackY>0)) { nextZstep = ZcurrStep + YdeltaZperFoV;} - if((trackX>0)&&(trackY>0)) { nextZstep = ZcurrStep +(XtravelDir * deltaZperFoV); } - - gotoZSetStep(nextZstep); - - } - - // shift in the Y dir - gotoYSetStep(YcurrStep + yFoV); - - // now go in the opposite direction - XtravelDir = XtravelDir * -1; - } - - // All done. Now go back to ORIGIN - gotoXSetStep(0); gotoYSetStep(0); gotoZSetStep(0); - delay(300); -} - -void doAtoB() -{ - long XMovDir = 1; - - // find num of Fov to be traversed and their direction - long XstepCount = abs(Bx - Ax) ; long numXFoV = (XstepCount / xFoV) ; - - if (Bx > Ax) { XMovDir = 1; } - if (Bx < Ax) { XMovDir = -1; } - - // setup Z data - long ZdeltaCount = Bz - Az ; - long deltaZperFoV = ZdeltaCount / numXFoV; // This gives the Z change per FoV - Serial.println("deltaperZfov is "); - Serial.println(deltaZperFoV); - // go to the origin - gotoXSetStep(Ax); gotoYSetStep(Ay); gotoZSetStep(Az); - - // Send sync signal to the imager - Serial.print("S#"); - delay(300); - - // go go go - if( XMovDir == 1) // means we're going in inc X dir - { - for(long i=0; ij1@VifeHzUZfOl2V-F5RL$%*WflXbFpo+mpRa{B6W@^r#Hd~_Oe`rP(Tu6A5>+O8kG?SWoy5_H-M zMyi@3LR@qTUUnb6?QH3Q?hwR_yl~ukexMev_*(DE6x+#J72qR4@|>#}QZPGOJzq zOIvC+ZCKdbYpgT2zNhlqL*YPtCOM=M|2!0?fKNxSZ}3B&h#2(w&E;gEU(=UvUq{F5 z^bz2u|Hdjz7%1aQi8TAng6>6SwZn}k)kb%$U#t<|IO6`xqq|S;%S1SM4*?Fap~h4t z(r{eVNcM<5ryJlakp+Hi(o7i+s*Lc)ow|s1+K}1OI8OaC$H?0F`HiY*!#1&Z8o)1} z8imES_w)GZcb0pCO$^irxs?!;KZ-9+4j+`{kmA2<%;7&SC}ynxX>V6tZB})RJaUv9 zy=;rpxWRU%@3oo#I3{a5=(qQM@xXoUb6MT0W{h7(%6?t{=Vd}r>!8~rA-fHW0&)vI z!ElQP|6t4FIhK^)2TYx3KDKfdLfaoMQJAM=@4n${4NKS%MewL0Oldzr5ZafiV zS^DOm3bu;I5W{A`rxcSWV389eK&us{50g-cyxXI)4fL}AxQDjOKC(H%lz>Pqi|XMX zQ#WR8nd(BYd$q|=CW|S)9(*m3S%3%r6UAHQl@$vE!Wy6654p>c18Q7JR_Pit$&VE{ z%NHT%i@$zPzyI(+d2_~blbZKxTqEoiMUqx}aMQ7EsQz_6!9BCFDy8xMg@edS1^$9G zi27!(p7J`o*lD*QTx4^tYF$~v?427;mW0-5)YRgwb7zNcw*=rYGh^S`7Gs9HaLZK4 zoU0+NwSiCjMf2Sau~4&X_54o@1BJ&2D>?0?ohN}lKXCz`Vdl(uv(E5PlKinj=b1t2 zfVap2dPLIt8io*b=~L;KT#Rl1ijRB4i^uA+8<81)-b6rPgBf<>*w7 zYD5eMGT-(>A|MHnbVweg6jBXof;|1;yX%danLr$3eq479p9de?5n5WIPr=LrV^(|? z>Vz85r=CamyQWo5+wtPUAhhRhhR@wY#GCKYHo!nYCU!S3>Y0)aU5|GxFW%6F6Jd{Q zEHBReYc#x0(6yTkYEZ<}RvTPS8+d&orCkgWt_~36y{-|dS#vQGe-1Iq1A-6!{vtac zr49UVXcA{wuMbIXr3$lm1H^Z_ zZg@vWpk6ltl}pod7csnH4Hn@`-<+0;duVUf)*fk_jrOhliv0OaEHzaFlSF%H&3oJT zv5a)A<$qtul7NTTE2f<}qXt6mXF)TrJS#!pnc>vH6y?${RT`I87KIQpw_5^9*tS%8=h<3t3lAVmIle!5+?%@L?o-XTAuqk7tce>@ zZu;at-__zU)i(5C2?^nCZIetjUN3s~g9j7~ksB zNbN1!lS?)j1J`mbAS+?}|hhCsrUMn7@4OYi?_G1VD|Ej2^r+4D*<{Jr(nt5hd{&#I9 zYKoSP*j%eE?HH=qrn7`mS2aryTu3j^)Qi&*GerpLCwQ!k!vkExiJA~+MrE^>p!;&^ z0cU)vAIuDoYz6&OjtIn=k=8%ONLu8R_J{NbO4YmJ${kCx%GhRI=2f4+BMeb&n)xmA zRVGA2BR3snRxQ=QKSv3?vc#J^-Hkuf9TSmV|$(`TiZ*!%+!G!yHzP= zpUUR$;a!(AT@TQWRqJ;cY;x67bZH*;a>8rKVI&}?Z+UB|`nwqkWp!AO>i&FvMq&iT z(e?++fh{<8HZ;WZf+)4k1_4v3e}z3W3fFBM+8(TISr-& z^>;An3qc{kt-B3&IcB#z^5l~K^!v|hG+1yr%=P1YsZYNM=Ie{<67M)S%vS3~@p^wm zpFLW?INKb|(d^<}M5Lgh?6qLuq8*L$U-dKR*k6n?!Sn}`^7pzM;RT{?-}QooB>b$3 z3f*a^DPBJLFo{G%Q97o-s_z;#J}IhQr36HP#Tf~TnThX7{Qw3grO6gh)0CIH+&<)Y zD?@2+OL{6Z*&Hr9Dj%>>F0L=ws-?$d9lzrItoBf^&S*Bq%z4KdDW~8|A|lkH zDz(zmkZ0T+Tfn1ZPps%-z9Y1h65gOsTrG$_Ku%X%v$8Nc`Kw#6k)T}PBne;*UN?5q zK+59V66QvZ67m(s?Jy8Mp7Qc;$YY{2izHt8!dLtv0gHRW_I}zVYR3;F>sododQ5Y@ z-Cfl7Wh9y4SZXG}#K7_q9^;`2&dMB~Q$iY;-pu`}8??u*QTWA-vrNx{2d`G}lO$?q zdf1{sgENNxy|8sv3;&aT=@3k>Q}tr0VHJZnga*=uQ)udaArVc&5)thC#=*n*fz6GV zWp%UbIu1TbLOY_U3|PUetj2e46;P7loT+>YpuL&kV{qSvD5=6Fq9EYW7DT|Fh4q}E zsOnllWLLzr!@aad;ewA{p?_xLdc*=Wxu7=rWjWYDCaBb+z2;<5DwNK<8Ro)5FIsw< zw)WIDY*2TS2qkm7s z%+@8$GsC(9a_#HJs^H_pH&qMf6-i2HnDO#D|4F5Pv5GD)poFgayPekiy z^*l9@zS$G>;IKl_+k11`L>v0ddpA7)yM3AWaXVy3?`BYWlK_GGUv2mqHE=7{UFr)1t12OjU=hyAU8GAJuxs-a{Ip=6(B{oeWWkUal^J)lt(LdVlJ z#idyFN(<6=-}kZr{J(tM4*S6+z@Z+DZz}pX|6!p{V8A~X4}_;!(5^Q7hDyA_x;0hY zH%x(mTk!4in*F+LV2{3I9vy0edT~Rvx)w`Il1C?FwDA|uE@n>^4z$+Fh#yF5IVCD- zDa6*N%de^N%%Z!#u*Z(s9em(+i~3mtDNPba8*QfEU#gT{+gEv^w$>OzZ}GmgJqw|? z6|reOE?E>c-N$+*w1E0m8SU$G{-qD6;X)o|nTVXm+4gG|V{ZjqBEQV`<&M~n2v6f0 z1}z-RO^1t4lva#u=dpl6c4vX5GV;rp5agJ_J`N!iI=d-_V47DyY{C$iM?d-J`&Uqg`Bj`V9+nbcQ;UwaRaB~N)GG9iHZp%{!y+%$K~Bb+M_bKlC({V} zJwR0IhhfV_QAiKm`2qXoF|eYn_pQ>c4eHtXgTSU5#3C)Qz)XF^KojyJ1YbPO08Obq zPJ8Z3qQbu?2a^h3vR%$~o6ZbEG_?j--OQCt5j8wA9;f-&_`Vj;olo2;A+-q;CKfd| zCKmaN!~Yv~_4;_4Q}-KCzF3{?I9!@eGs2GVDqDF$!7C3h%0B$diffNQH+>o-+$2@z z|8GYpSg-h|)_+a1v4-nElT3qPO3|+kXE4|fH_S|-PQ^NmxxuV_19pGU1Yx8KL{iJU z4s_);x#a0=a{ogz`r31>QJ(`GZ-efKe`8EIiiPdD-S~ zW-ZDuMSi`lz>P`R#%ckQs`U|4J~GnY5k>i~qQsxRbRsLQ+0+{c783po!t9g2^3OWe z?QN|nZF7Wc6x4d&!7mo&0pKo#!NDpo2yr}Wm0eLMyrp<$`;Z8-@|cz$4*lCYbb( zNK_lYg%cePJDS;@wdd1lCU~vQEqZGn#j>Q-(uSe`61XYZ7E+JZ8}M#F{nTUkdhm9X z0O30W_8oil8hFgHbf)V*J`+l5t~ynkz$@mSdS9)fKdNi_Fssx3B_+PCoTH6grd+Zx z9Rux>IJy)4QIfYJq+p8j=eSQoz(5stHx8%)}q2$5OArJYQvN+RL2~(3=NxKu6?Q%4!^+)Hy9D zMU~f7sU=BsTb$IsZs}G#}eg~gECH!cW$UJJuL$V{p!wgx|FAB)MbPypV zH~ny@4*0gDUuX)XSW0qZ7)}6(#)9nVE!A6H>JO}28g(9!IBhXnk6QGP#q%wv$oI3P zczJCFzuSm%;L}ITutIkWzKWxKt(4@*Yi~SuLMnk$9Y^O=vK4!q6F}7Qjm-HA_Mt85D0}Hw-rerTq zh@YdnS!xlBdLU8up@d^*brg8P=GsFj#tfM6gb4TgGGmK&9yNvtcQr{YW<~nt(R-s- z>yLl4)a0F7jg}Exz-iX@(PH?wIoCB{H}O+Pcob1T=POL9iNL$&%l97vS!JdSsj;Wl z=9v9Y@?AL_3e@`A>GmVl2AMZj7`qZ!9bmc8O<5n0ZE639{=GZ`7Kd+s!Z-l?A_9V! z#G8$lj0wd+;NXqp&;#={FVWMPb?CN%@I_O<^+OaW{T}cLt_zvmW@!bBb4l({*~9Li zz&P%RN2tnk2=nw)#6BE^{68k!WC}>4ObYU)sxAvI+mRQ~kp7&eA}-cg-l9rxqprX~ z7VCke*DkPoJF@X}rO|iPX)um)P3$!`Ap!*brg>Qt zZ!_k<(#AVD=lyyx4GpYXzc#zYKb$P6&-}5wP#F;7>>D%Y+GMlK)o*W4XAU?n1Fd9l=Wij)102wE zcdBFEuR$%VXVO*&W=Z8^g-?HH z+?_mykxQR6`Zk{nyMhzE!@c20Oe-~7aWe_b)S}K7%D;T*txo(4u_Bcuo16G8`0FSE zQxrIJr-=hou7guZt)aVYemFa~%D4GS$NY7*1OW@>gy~X!meAg)K7@*h3?e;F7c%&` z>;AY|&`2|Fik9{lom+0j=%M3l|Xaor}-@AApejBV&EW}097xv7`gZE)A%W$6+; zv&DT+4QJ6HSy;N`16KlMyuOgL4sI-E(JfY#$2r^otXF?o#g|JJhA^?n(K;DuJCScc z(1GlP-Y*AwMRj3AcKCJ27(+BPr6s!VkFF-lsFx~Yld01T|z6?s2NH1}i!EwBV-NhNr>tYn}BRnkzS zE?$n%WxhxEYK@*O&16a*NmFL^V^6N~@y`e~5(=UR$kP0x6e*g(`zoLQ{H6e~zj5LF z(&c9~3n24yBqBNBCoY?LmI}DqyMwc~TJhpRI@xhn&l7`riswQBJN@r>bcwS$a=TM# z8FCI<@pV4<9TBhjD;koRUz+?-uZKG`!}=2 zFiT^@_6D%@Q{;4Hb+*T)=qq2+e$DitqAzwHI0EqcDKdCYawuc0WY7nQqy%k_M5COY zI)hKh)Bv+!(FjJ1EajV#SKXsUGbIkPR81Ww%riD-tP(OkU+J^l>kJAV#u7HIwfj6ez8jw)sDyU;DFJW$d87w~N`zW#Opy-xWXAc2fN8@dWmi)(vq?`G<(D+BA?mArPPh(ad!o&m+XzvVu zU}lkW@iBVneD=>A9=@oE)(#wY0fdepj;rzV9PwK*9aGVi?80r9WjZ#6J3#1JMM-_+ zK{1j+F`HDD>{z~J1f2r)u@6I>JjBI+i`1vZRIdwzB`|k3 z=rW+?fg=|CkluA6ST}%}+b3HT-Oir30}D<2h(SS*oXjQ*i`hzGjC&uy@{5dRLa!-P z{@38Qtk{}7%nn!4Bc8;&jWiFFKr8aH5PlOZOKqSe?JKtD`BHMVN?t$Q~u95=#!lT3UJX}85JK${13H4m8K;?J)w%Dhl*k$ z-X51nTMXWR4rl3t2mi`R0!9b#9CW9DoCgn8-|T)yHylzU;*B~3ezJVEuoUM%o|i2l z7nMETQM5bEX?M7!Tyz;xKRdeN1ny)@}nHGYX5>LMP2L29=aQ zzq7Z!UyNoiF-owBiWr@1G^RC_@bhFK33{e653+$G{1)CLybSiem?;(+?-8w&fZ1@;3qP znjhZwBacsE(3iA{j=xbpI=DV%^<3ZLkDo6NKrCI<-(mUlk}Oi>3|Zgj!9PihcAg7( z<+_X6AF5)i@4kx#DM$Lei-ec8jrKefA6)oIHr-pMO1x~JM~xd~mu7p;x$NKk(Au3; zz5My-DsTBgv@u8DyjXzEqWLPBzxT-pd)Prcm?tz0NNr&211gCvkTlQam%$a=$A2_@YMW;;|u%wF=WHSGOcgr?xR3t*UF_BMETFELwo> zI`t=$R?O@RU~o`+u*<0aN&A|oIc2W;<*<&GBw}#ZYGci<=gWmokA;uPX3Z9F{M)fs zmJiayDuENf&H$$P&E5g)Pzq0Y#scN&l^|TN_{lJcw zjZW zw&e_og`Ve-!!MJ1ueUw5_Z4J7!lg2PyKxHPMQpwz?d*@P)UH|PXK-jBRas4-dHnru zlfbe`a>6Z)$;8btq}f8gb8$7uL<_SE0fN5NJ!vq?^;Vj6fl%(NBm7o@KYL>;%3#g; z-H)FptAH^|Qnz^>XaK!n>|y@+%_OaF%ux@=*0*^|vQ6i)O?m5}P2f+c*@#2$vGCOf z5R!X|uL~MKU%Q5v^T~bF#zG4zD^B)SyCNUP+tVp8-jPdoE29I2KR!U2mW!SrAn2(x zO}dlg*@ll)@88!uN*;~Z^Y_BPMlydXNM53Z8_J?`Zk2z|4!&!B!yDjydPdF*|L+Fg zSPQr+LRw)1wwU+vNL5J3qws#SgEXE3kS^nFQE5zHl0Bo$1p5@2C1;VDRdZ1iuZu`N zwB0uEniluT40MEsp`3bl9{vQ*Dufk8pY!Q5*yMV0ni+&!3nGUH{@j>JPENjrjp1Vb z4Jt#Z1m@oOsQ_j+Sn)?l*$(QC^$Qt8T2CpKeYE*N2T;IL@+Eeo=%=|)&Z zPQLvzRnhOJ{#{zV0U-IZ%5@LP)pw?@$Vk8V<)EZ-@8)kYK-pDiee3kqR-Uc$=&f?} zF5L8~=qMw@-MK^GD;>OkNycrRc9%C}{X9R>spjguV~eI6V9neS8jG!r(uGBW>K7?5 z?KU3>Zp`ri`chN+wRdUMEY<=8ay|<{xG0s)ml|Efr+Rvpj+e8Lk68m^>8&UHW|gj2 zoA*RH-f|zwqvq9tM<3`{M#m#3^Fk3m0=Y#$y4_;kjQxlP`Y#Jt=rKO*q3}p9d#U%- zKtiF2UMhi0g7N@8ahU3_vy$&PtG`?9@+^P-Fz{`jI=Nlk&rIOU0efM&e?$^RuA<8= z{C#6zF#=_@nyJ|$N4m0%QC#HtYJ9aY^Zw;Adf6!RSJ4P9JT9yGx&i=7mV4&5VzA)(hPzdts)%%w(fb0HCiY${-i2e~cm2XRj# zy5hvlFPRSDCbKh7J6!{i71Dsf?Bh&@8{Kf4+sc808*?L2h)&=`$<2(?r|cH8+olS^ z?4s%CZX%!VI=b@k471-A;YCCKi4ijcXA+z%igxt=|9}aEVi?#6G2`88HJYD;+|6w9 z^}3}^ZFuW|o%T{Rezs2fDc&Q+);fx#dQl*b{bxj?E_H@3TZMD6Y=ds-1dgNSh- z3of=dL8a&W(Nd4MYdOI|p9WeRuiOrD?hR|eF)Mz05b{jrEwf}>>3NH{$u6u?lKBpY zvO@t}!D%shDlrnWjJJp35E7WgD~divvVjjwy}vn7PCr}XM_SGhT) zT&DCUNW2~+*j#tT;e_qESmmYIOOw;x0-PaVsm<;v8D$prCo?${GM)7u$Zq8r^_wj~ zM)-3c%5v~$t=}>t)=x6c9$b%W_%c=W{>nYcpjUU-i{stbWuZZ+7ocCEL8n2xYUx3{ zZ6~b+vdvJg{duRWtiwM5V0G_(S6kJilz6s-mwe`-sB1URXE}hLiD+X*8dqelty@W~`WLl?PDCT}$3jtT#sGbat2rybkL$z++AZE+v*gbU zF`rqtW*OI3QFUpN=r!}j8eD=h&snOVyRzssPQPeYp#cuQ_B|Q{eW_S)vd6Jf`M0O_ zzgt*T(UYhei*O&lkiNkzMM`YnTyJ*q21Gy`0Qh7+aL^x9jYh&sW(ONwkqyqZZw|5 zEb7Q6SCtBh*ayRZg$rVL6-0i2Cudp_`qken%km+bCZz}2| z5I7P_dX)Lz?8R4)HN8&Lfy~4or}Fn5OBKqj#fAmZbFoCxS?F$TlTkh|cAGws4Wqk3f*36VH z;!oQt(&zj`ze^fp-*k=e(boZ$65 zpaD*i0;Bp*Aq`rX5n#9RrQ@rps{n_~`RPKs9Kh88th9W$w0v`(6xNS@7jFWt>1HdE z%h56m?EbK~O9MHRkQ@ixm`D|nIc^F67<(`tp?tLjzB>;$bKTkUcga z^t-N(Ew*l|IB`ec-@4v~_<}%l-;yrCY&EvHH@`p7b~UVj&il zj9Pe(yCMKz=tLRw7K-bsHN@L5u)_+6B$xq`JSg0D5{Oy#vt#JTQ9b&1Y&R3r&kOH% zY-xo?$GO-)C|XokJv4uJlxUd94FMH87NuGt@G^@%Gna^l94&vMPYX^P1MYr)3h$32 z;d!0#)kk1^%#+5eCgd1e{x0ZA4r~%_99Hu0#GngU{K^E2Me+lbBg??HGr5yTbf1Jb zXx(Ea0dhQk_D_lW7#|$kp}$!f{<_F2*tAknI>@*?+dJb?pTKBjLeSaDz-sIj-1iK8 zl8bM|iQB4;-~Wuh;;UE@zO* zUuKTC&ZJAM{RF+@jCVY1)*W)s#!PzZQXbqy@%}2AWp3F3gokk?ph3 z+425v&8#@1q^8qR4EQanwT_}$_!qtZd8nTDuBp`sbh&ZH=jqyQx_CMHw5!krcv*V0 z5meSmdv^+&Y3g0a%RzukpK0H}(27+&&m0i&!V5dk6dzvC@D6i~eMGrtc1OR~;;tchD_QgygVHsy@u^V!AiOM`Z_;!wSu zMRb*Ih(nvTj}wC{73?e~=)ect@cRNYKk?7@k`^?pE@CQ%x&Oup&|@Z3 zbbfrl_(~!GE9~8BYzvn*-B&Tqk0*b#q_Od;c}#q)gHedpUXu~KF7L!S zP=dJ=^OjZKy>apmAt^eQ1j8o3vN0kd_2(7=Qay3v8CElC0rix^GdLkA)=|w|SnB zRMU|F-o=}5C>h8?w`y%D@+~p1-;S|m*y+JgXCT(Ey>`B|?GW|yB;>~9X?PBK9taOr z&SSyz6LsVw(0TzLjS|Y0R?P=V95y7)%9?_9TrM2Y)&~0O#XFc;Tct|UlU|3r&nt!$ zt^urBu#Z63g42Ql>rR5OEgg|s^h#3t?!x#=OqnK%8j8%fVB_!46s5rr?Mtelib%3; z(9Up5brD^ zNqenn3apYpW_>cdoz7yv-uC^=-Qs({he|vTvLkFrYyMWi$4NZm6ySALd!-3>E32|Xu@Eq*r)t9VJ$*(R3KsE3LR2g9wg zpsq1GMfPt?Rz|h`yW_ok!`s%9ni)-+ULengrjC?g7@?u|_^eRpIXBIbp}esm64ZdJ znmFi7v96J#ZlpY3rJc*62lT$n$I7oZ@BV9M@bqjI#$S?)v3T19u-+<6@Ax^QePsv* zvIP64=czzPATcNxpVzh3GqK^YrbDjwAy;Bun^R!bw8&|su99)C4ouJ5J6ab=v{|D* zHQ?{obfZsvow(3oskU-5cpOye`b{T?b8^%saJ?q;gu=y{!NeL)ohKggwQ|Ysqe=6z z)2#SRYE|WwbnSH8a5doVv=}bzPgv(p2d}N7>5Qv85rR@|J|@aHYW4a;V&_XI#M%M% zb(dS62iC)jQo!vg@W1p~juvp9k78uK zu9||6Eqt)8*yHoBk19@*abHv??dH*lT{v69gvfl{b6Y-`P%&T3_6#TWwQfl!CilnT z#9-5V%Auh7rgIg-Sj)?F2||TW&pYo!UITm|^|FvG6C+4-%EaX`Cs@43acn84d=~7% z^|Q#wD)XLUNeenfMom2vq4ufQE}f^olos+0nIOW}q?}T3Rx}GkKRi6Mp?;PM!O`O~ ztvOW>36ht~piiW4f4%^BKY#>EiXIBDPq`&TxFXu<5}9pt@ygsVeaJd7_#4O;T!#2- ze8qZgSHFLw7qNRog!X(c86O(l!FE67TpK}EMzrp!Pylb#W+iFV6al%o@>wmzFX%p& zL`U#n*L8Mi0AsB&(S9l7su8phHFsoUwSroe6*sNEodCF>VH{_MBF`!=aolW}r zF{i`KjJp=VDP1Sc`{Ti6uU75LtOnJ*#%D^38iL0Vy>Sqfe|d)M5C_S2W+|lpXrN0A z*wA$TR|Wd~H@U6XDBP;X*UV2p=Ukt%-sj8YQKz?A?hVyJVOG{@=dFBqPQd}qetV!t zPlbc#&17>Y#zdGY4<-g^IyI`cn|ckeu$B!GvE>uq(`vpc{J}Duqn5{D$vA{0Uo7T! zc3b-ryF!$GP1$r=%TOzT7Qo!@;s@s{gwFT$>gLlxmA=`usO$!j@C3JMg7lZG6JXn; zkZrjKKJ?+s;rU>#h~3b}Ks}SXF0KfY!^)yhlD0Hc!?lbDZ0p~kD!2YO3J?{@QKFA3 z&9zi+wiL?sl_TX)U+E4-4c{{r+Z9~$HO`ezvKD~+=^9?OMP3b_YpJ6f{*`j>do(B+ zZl0TLraYRl?VV-6#0kTL_qso3&wMQHqqh>-#knMhBnIXfAVgC4=&){W|JX>I^ z&C2zrZDD{?fGm49ghrZ&Y@y9(h^k!Do5w(!CnWVhQf&T7k;;aosnOB!?Dru&E9XlZ z|3vm88rsf#dDo$v**yKB(=NnUq0IeCKBNes(b(vJKj@RAnwN^#(X)>#{xubc3Vv9> z*bVuAk>bpM2V^LukAh1Z9fO;cf&RN-Yq^oXzb>Xc79EgwF~LW zb2!Sv{r9XYQUOqc*&#-nuAm!R^~AXXc)w;V=c;=v+HQ|6qQ<4?nJkH6PG@QMrBCL~dfy5i(y z)~2!~14@>tNKXTMJ9@G1@#NaZROeB{W^J;^p3k{;6;c*(DrgBlP)TdCvKp+tmT??9 zJuxN|t3jIhPCs)<-}zz0NoSjn^_6{ozW{4S%>%pYj`-^|c0ob~YuC*%;lX*;w^~g0 z6WY;SNg8h=(v9OC8AGakF6^Z{-XQ|P)f>+w3Qo)TelE(tVN(0ppZ&e4OQHv)x2GAy;l5KE+*0cZbIz= zGj^C?-=MX;xNxx1tn#b5F!>B~2~kxhi8wS^`6Hfqqiz)A#=Ey~Q8%8bUX^ICl5*Mu z+pmF?Uu+JfDgaWi4jpK_WgTCNV*yO7POyIbH)*9|Ym6$-n>($s&v z4=oAlBiGs2^V+X%{PiOpJ;Zn(>)YsZm~zv~im& z6lej23X@F=-myL81^xu9_YBtpMjSS!bvECX{~@@u4ZPOfz~<7^x#0TNAS0CXQymQO z_w4&G=5E-ebnEYsDRw8&#!O1A)L+F0C*bWQULrwBY*!Z!-S+X2fY7?U7z{ zZn8dC+~=hVEnmWNm`hT{H<4a~ib8r%-XaTa%tn+XPd>*z|kd$4?ZB6)ahPx%n~ z!XonfXj6GNacLv{w5v9-3gj{HbSi1hQHyALhlTO|IsgrAW3ar6txemg|Q)891mWt16a z6rb7*mLwy`*@yq33!zqd%xO4M@MYzkm9b=_eRs(8Iy;j2!1jA2)Azy2Cc3RqTNsw? z!+5!(q5=BD@WL#?Crkl6q{5hO$ba5?gz`U^YqG}O=d~%K>Zw_$k0zl~1b7YSx$m)F z6XB#7D;av^#csWGua0lsBJxj^K~b~(ES(&-PNnxLgRW6t1@_*^swaK3l~u=Pg;4%E z2ZzY>jgOx?l_5o4+f!(0ajSltwk5Ze=$Zw#c|A@0#%7FpkiS;{T^A`|HyW9^IlwS#5j()1(LA)>RqNf+(jv zqb$a{wdAIanz|zQv$qqCQ?+7^3w*l!|e|e|}d~0fk+%mQ1{<+2fph1`x`Cf-boYCSYpoxa6J%geIUUSXPFKHZ^&i zbx#lSru|7!ragnPp6vG`QbYh--xhETpimlshpR_}!I+^eTi`{Vs7r%xlkwD=Dz@** zCl`RCu3Lzvmr)@b;f1QMSBN2);n2sm|I#g~9DqNmSBQy|LEgu(uh{S|0GmtC5`#0t zsE=dcpg}1BuSU-j^KFJ`AIrW*gJJ-VtKJ5NWQJcK&%Q;2asa`Z-UcRS20dBJrAV^T&dEvUaLv=q6n=>b41`9KW6 zdwLn16%L&q-juHQqFu4N%ZA&5{vQbf@eT1`S4f+WpOFmd4v;=7G2s$9$ZbQBukq>Z z6?Btpim){RD&3fAftEtIu8t>i!Pr<(o(_{lZ75gDqz$DH;>VNnI^g6*2bSCcT7Z{c z(Eg_gv;E0x%M&2@8b 250000) - check = 250000; - end; - - str = sprintf('%06d',abs(check)); % abs needed so that no +&- in neg numbers - - if(check < 0) - newstr = strcat('-',str); - else - newstr = strcat('+',str); - end; -% end formatting ---------- -------------------------------------------- - fprintf(s,'B'); - fprintf(s, newstr ); - - - -% --- Executes on slider movement. -function slider1_Callback(hObject, eventdata, handles) -% hObject handle to slider1 (see GCBO) -% eventdata reserved - to be defined in a future version of MATLAB -% handles structure with handles and user data (see GUIDATA) -sliderVal = get(hObject,'Value'); set(handles.edit10,'string', sliderVal ); - - - -% --- Executes during object creation, after setting all properties. -function slider1_CreateFcn(hObject, eventdata, handles) -% hObject handle to slider1 (see GCBO) -% eventdata reserved - to be defined in a future version of MATLAB -% handles empty - handles not created until after all CreateFcns called - -% Hint: slider controls usually have a light gray background. -if isequal(get(hObject,'BackgroundColor'), get(0,'defaultUicontrolBackgroundColor')) - set(hObject,'BackgroundColor',[.9 .9 .9]); -end -set(hObject,'Max',250000,'Min',-250000) - - -% --- Executes on button press in pushbutton5. -function pushbutton5_Callback(hObject, eventdata, handles) -% hObject handle to pushbutton5 (see GCBO) -% eventdata reserved - to be defined in a future version of MATLAB -% handles structure with handles and user data (see GUIDATA) -s = handles.s; fprintf(s, 'N'); fprintf(s, '0000000'); - - -function edit11_Callback(hObject, eventdata, handles) -% hObject handle to edit11 (see GCBO) -% eventdata reserved - to be defined in a future version of MATLAB -% handles structure with handles and user data (see GUIDATA) - -% Hints: get(hObject,'String') returns contents of edit11 as text -% str2double(get(hObject,'String')) returns contents of edit11 as a double - - -% --- Executes during object creation, after setting all properties. -function edit11_CreateFcn(hObject, eventdata, handles) -% hObject handle to edit11 (see GCBO) -% eventdata reserved - to be defined in a future version of MATLAB -% handles empty - handles not created until after all CreateFcns called - -% Hint: edit controls usually have a white background on Windows. -% See ISPC and COMPUTER. -if ispc && isequal(get(hObject,'BackgroundColor'), get(0,'defaultUicontrolBackgroundColor')) - set(hObject,'BackgroundColor','white'); -end - - -% --- Executes on button press in pushbutton6. -function pushbutton6_Callback(hObject, eventdata, handles) -% hObject handle to pushbutton6 (see GCBO) -% eventdata reserved - to be defined in a future version of MATLAB -% handles structure with handles and user data (see GUIDATA) -s = handles.s; -% format the number properly -------------------------------------------- - str = get(handles.edit11,'string'); check = str2double(str); - % ensure that too big values dont go in - if (check < -250000) - check = -250000; - elseif (check > 250000) - check = 250000; - end; - - str = sprintf('%06d',abs(check)); % abs needed so that no +&- in neg numbers - - if(check < 0) - newstr = strcat('-',str); - else - newstr = strcat('+',str); - end; -% end formatting ---------- -------------------------------------------- - fprintf(s,'N'); fprintf(s, newstr ); - -% --- Executes on slider movement. -function slider2_Callback(hObject, eventdata, handles) -% hObject handle to slider2 (see GCBO) -% eventdata reserved - to be defined in a future version of MATLAB -% handles structure with handles and user data (see GUIDATA) -sliderVal = sprintf('%06d',get(hObject,'Value')); -set(handles.edit11,'string', sliderVal ); - - -% --- Executes during object creation, after setting all properties. -function slider2_CreateFcn(hObject, eventdata, handles) -% hObject handle to slider2 (see GCBO) -% eventdata reserved - to be defined in a future version of MATLAB -% handles empty - handles not created until after all CreateFcns called - -% Hint: slider controls usually have a light gray background. -if isequal(get(hObject,'BackgroundColor'), get(0,'defaultUicontrolBackgroundColor')) - set(hObject,'BackgroundColor',[.9 .9 .9]); -end - - -% --- Executes on button press in pushbutton7. -function pushbutton7_Callback(hObject, eventdata, handles) -% hObject handle to pushbutton7 (see GCBO) -% eventdata reserved - to be defined in a future version of MATLAB -% handles structure with handles and user data (see GUIDATA) -s = handles.s; fprintf(s, 'M'); fprintf(s, '0000000'); - - -function edit12_Callback(hObject, eventdata, handles) -% hObject handle to edit12 (see GCBO) -% eventdata reserved - to be defined in a future version of MATLAB -% handles structure with handles and user data (see GUIDATA) - -% Hints: get(hObject,'String') returns contents of edit12 as text -% str2double(get(hObject,'String')) returns contents of edit12 as a double - - -% --- Executes during object creation, after setting all properties. -function edit12_CreateFcn(hObject, eventdata, handles) -% hObject handle to edit12 (see GCBO) -% eventdata reserved - to be defined in a future version of MATLAB -% handles empty - handles not created until after all CreateFcns called - -% Hint: edit controls usually have a white background on Windows. -% See ISPC and COMPUTER. -if ispc && isequal(get(hObject,'BackgroundColor'), get(0,'defaultUicontrolBackgroundColor')) - set(hObject,'BackgroundColor','white'); -end - - -% --- Executes on button press in pushbutton8. -function pushbutton8_Callback(hObject, eventdata, handles) -% hObject handle to pushbutton8 (see GCBO) -% eventdata reserved - to be defined in a future version of MATLAB -% handles structure with handles and user data (see GUIDATA) -s = handles.s; -% format the number properly -------------------------------------------- - str = get(handles.edit12,'string'); check = str2double(str); - % ensure that too big values dont go in - if (check < -50000) - check = -50000; - elseif (check > 250000) - check = 250000; - end; - - str = sprintf('%06d',abs(check)); % abs needed so that no +&- in neg numbers - - if(check < 0) - newstr = strcat('-',str); - else - newstr = strcat('+',str); - end; -% end formatting ---------- -------------------------------------------- - fprintf(s,'M'); fprintf(s, newstr ); - -% --- Executes on slider movement. -function slider3_Callback(hObject, eventdata, handles) -% hObject handle to slider3 (see GCBO) -% eventdata reserved - to be defined in a future version of MATLAB -% handles structure with handles and user data (see GUIDATA) -sliderVal = sprintf('%06d',get(hObject,'Value')); -set(handles.edit12,'string', sliderVal ); - - -% --- Executes during object creation, after setting all properties. -function slider3_CreateFcn(hObject, eventdata, handles) -% hObject handle to slider3 (see GCBO) -% eventdata reserved - to be defined in a future version of MATLAB -% handles empty - handles not created until after all CreateFcns called - -% Hint: slider controls usually have a light gray background. -if isequal(get(hObject,'BackgroundColor'), get(0,'defaultUicontrolBackgroundColor')) - set(hObject,'BackgroundColor',[.9 .9 .9]); -end - - -% --- Executes on button press in pushbutton9. -function pushbutton9_Callback(hObject, eventdata, handles) -% hObject handle to pushbutton9 (see GCBO) -% eventdata reserved - to be defined in a future version of MATLAB -% handles structure with handles and user data (see GUIDATA) - s = handles.s; vid = handles.vid ; fid=handles.fid; resetbutton=handles.resetbutton; - set(handles.camwait,'string','Custom area scan started.'); - - tmr = handles.tmr; stop(tmr); - setslidename = handles.setslidename; - fprintf(fid, '\r\nStarting area scan...'); - XFoVSize = 1823; YFoVSize = 2323; - XPulseRate = 38400; YPulseRate = 38400 ; - Xzadjustdelay = 0.002; - autoContrTime = 0.1; - - XImDelay = (XFoVSize / XPulseRate) ; - YImDelay = (YFoVSize / YPulseRate) ; - - % send command to Arduino - fprintf(s,'Z'); - - % get the co-ods - xA = str2double(handles.xA); xB = str2double(handles.xB); - yC = str2double(handles.yC); yB = str2double(handles.yB); - - % logging co-ordinates - logline = strcat('\r\n Going from X co-od ',handles.xA,' to ',handles.xB); - fprintf(fid, logline); - logline = strcat('\r\n Going from Y co-od ',handles.yB,' to ',handles.yC); - fprintf(fid, logline); - - % find num of FoV - numofX = (xB - xA) / XFoVSize; - numofY = (yC - yB) / YFoVSize; - - % wait for the scan to begin - while fscanf(s) ~= 'S' - end; - % start counting time - tic; - - % NOW TAKING PICTURES - rowcount = 0; - filecount = 0; - - msg = '\r\n Starting image capture ...'; - fprintf(fid, msg); - - % Dircn = false; %We believe we start from top - while(rowcount <= numofY) - while(filecount <= numofX) - pause(XImDelay); - snapshot=getsnapshot(vid); - %enh_snapshot=autocontrast(snapshot); - filename = strcat(setslidename,'_',num2str(rowcount),'-',num2str(filecount), '.bmp'); - %imwrite(enh_snapshot,filename); - imwrite(snapshot,filename); - filecount = filecount + 1; - end - % wait for shift by one FoV in Y direction - filecount = 0; - pause(YImDelay); - rowcount = rowcount + 1; - end - % display time elapsed - time_to_scan_area = toc -%numofY*numofX - msg = sprintf('\r\nImages captured : %d x %d', numofY,numofX); - fprintf(fid, msg); - start(tmr); -set(handles.camwait,'string','Custom area scan completed.'); - -% --- Executes on button press in pushbutton10. -function pushbutton10_Callback(hObject, eventdata, handles) -% hObject handle to pushbutton10 (see GCBO) -% eventdata reserved - to be defined in a future version of MATLAB -% handles structure with handles and user data (see GUIDATA) -s = handles.s; vid = handles.vid ; fid=handles.fid; resetbutton=handles.resetbutton; -tmr = handles.tmr; stop(tmr); -tic -setslidename = char(handles.setslidename); - -set(handles.camwait,'string','Auto WSI started.'); -fprintf(fid, '\r\nAuto WSI started.'); - -XFoVSize = 350; YFoVSize = 450; -XPulseRate = 3800 ; YPulseRate = 3800 ; % MICRO METER PER SEC -Xzadjustdelay = 0.002; -autoContrTime = 0.1; -XImDelay = (XFoVSize / XPulseRate) * 0.45; % reduction of 60% needed to compensate for MATLAB processing delays -YImDelay = (YFoVSize / YPulseRate) * 0.45; - -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -% go home first. Send command and wait for sync -fprintf(s,'Q'); -while fscanf(s) ~= 'S' -end; - -%Af at origin and set this z as zero -%fullAF(handles,16000); fprintf(s,'L'); -disp('let go'); -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -% Locations of points : -% A: -% B: -% C: -% D: -% E: -% F: -% G: -% H: -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% - % GoTo POINTS, AF and Store var - gotoX(50505,handles); gotoY(25250,handles); handles.Avar = fullAF(handles,16000); - fprintf(s,'E'); - gotoX(126260,handles); handles.Bvar = fullAF(handles,16000); - fprintf(s,'R'); - gotoX(202020,handles); handles.Cvar = fullAF(handles,16000); - fprintf(s,'Y'); - - % Update handles structure - guidata(hObject,handles); - - % Take another value and find if it is > the smallest of the three. If yes, replace it - gotoX(166670,handles); gotoY(50505,handles); Xvar = fullAF(handles,16000); YourImage=getsnapshot(vid); - if( mean(YourImage(:)) < 230) - bestpoints(hObject,handles, Xvar); - end - gotoX(90910,handles); Xvar = fullAF(handles,16000); YourImage=getsnapshot(vid); - if( mean(YourImage(:)) < 230) - bestpoints(hObject,handles, Xvar); - end - gotoX(50505,handles); gotoY(75750,handles); Xvar =fullAF(handles,16000); YourImage=getsnapshot(vid); - if( mean(YourImage(:)) < 230) - bestpoints(hObject,handles, Xvar); - end - gotoX(126260,handles); Xvar =fullAF(handles,16000); YourImage=getsnapshot(vid); - if( mean(YourImage(:)) < 230) - bestpoints(hObject,handles, Xvar); - end - gotoX(202020,handles); Xvar =fullAF(handles,16000); YourImage=getsnapshot(vid); - if( mean(YourImage(:)) < 230) - bestpoints(hObject,handles, Xvar); - end -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -disp('The time for 8 pt AF is'); -toc - -% now asking Arduino to do WSI -fprintf(s,'F'); - -% logging co-ordinates -fprintf(fid, '\r\n Going to Origin and starting WSI '); - -% find num of FoV -numofX = 50000 / XFoVSize; numofY = 25000 / YFoVSize; - -% wait for the scan to begin -while fscanf(s) ~= 'S' - disp('waiting'); -end; - -% NOW TAKING PICTURES -rowcount = 0; -filecount = 0; - - msg = '\r\n Starting image capture ...'; - fprintf(fid, msg); - -while(rowcount <= numofY) - while(filecount <= numofX) - % take image and save - %pause(XImDelay+Xzadjustdelay+autoContrTime); - pause(XImDelay); - snapshot=getsnapshot(vid); - %enh_snapshot=autocontrast(snapshot); - filename = strcat(setslidename,'_',num2str(rowcount),'-',num2str(filecount), '.bmp'); - imwrite(snapshot,filename); - filecount = filecount + 1; - end - % wait for shift by one FoV in Y direction - filecount = 0; - pause(YImDelay); - rowcount = rowcount + 1; -end -set(handles.camwait,'string','Auto WSI completed.'); -msg = sprintf('\r\nImages captured : %d x %d', numofY,numofX); -fprintf(fid, msg); -toc - - - -function pushtoimage_Callback(hObject, eventdata, handles) -% hObject handle to pushtoimage (see GCBO) -% eventdata reserved - to be defined in a future version of MATLAB -% handles structure with handles and user data (see GUIDATA) -disp('unused func'); - -% --- Executes on button press in pushbutton11. -function pushbutton11_Callback(hObject, eventdata, handles) -% hObject handle to pushbutton11 (see GCBO) -% eventdata reserved - to be defined in a future version of MATLAB -% handles structure with handles and user data (see GUIDATA) -s = handles.s; -xA = get(handles.currxpos,'string'); handles.xA = xA; -yA = get(handles.currypos,'string'); handles.yA = yA; -zA = get(handles.currzpos,'string'); handles.zA = zA; -data = strcat(xA,' , ',yA,' , ',zA); set(handles.xyzA,'string',data); -fprintf(s,'E'); -guidata(hObject, handles); - - -% --- Executes on button press in pushbutton12. -function pushbutton12_Callback(hObject, eventdata, handles) -% hObject handle to pushbutton12 (see GCBO) -% eventdata reserved - to be defined in a future version of MATLAB -% handles structure with handles and user data (see GUIDATA) -s = handles.s; - -xB = get(handles.currxpos,'string'); handles.xB = xB; -yB = get(handles.currypos,'string'); handles.yB = yB; -zB = get(handles.currzpos,'string'); handles.zB = zB; - -data = strcat(xB,',',yB,',',zB); set(handles.xyzB,'string',data); - -% send command that sets pt B in Arduino -fprintf(s,'R'); guidata(hObject, handles); - -% --- Executes on button press in pushD. -function pushD_Callback(hObject, eventdata, handles) -% hObject handle to pushD (see GCBO) -% eventdata reserved - to be defined in a future version of MATLAB -% handles structure with handles and user data (see GUIDATA) -s = handles.s; - -xD = get(handles.currxpos,'string'); handles.xD = xD; -yD = get(handles.currypos,'string'); handles.yD = yD; -zD = get(handles.currzpos,'string'); handles.zD = zD; - -data = strcat(xD,',',yD,',',zD); set(handles.xyzD,'string',data); - -% send command that sets pt D in Arduino -fprintf(s,'U'); guidata(hObject, handles); - -% --- Executes on button press in pushC. -function pushC_Callback(hObject, eventdata, handles) -% hObject handle to pushC (see GCBO) -% eventdata reserved - to be defined in a future version of MATLAB -% handles structure with handles and user data (see GUIDATA) -s = handles.s; - -xC = get(handles.currxpos,'string'); handles.xC = xC; -yC = get(handles.currypos,'string'); handles.yC = yC; -zC = get(handles.currzpos,'string'); handles.zC = zC; - -data = strcat(xC,',',yC,',',zC); set(handles.xyzC,'string',data); - -% send command that sets pt C in Arduino -fprintf(s,'Y'); guidata(hObject, handles); - - -function editboxslidename_Callback(hObject, eventdata, handles) -% hObject handle to editboxslidename (see GCBO) -% eventdata reserved - to be defined in a future version of MATLAB -% handles structure with handles and user data (see GUIDATA) - -% Hints: get(hObject,'String') returns contents of editboxslidename as text -% str2double(get(hObject,'String')) returns contents of editboxslidename as a double - - -% --- Executes during object creation, after setting all properties. -function editboxslidename_CreateFcn(hObject, eventdata, handles) -% hObject handle to editboxslidename (see GCBO) -% eventdata reserved - to be defined in a future version of MATLAB -% handles empty - handles not created until after all CreateFcns called - -% Hint: edit controls usually have a white background on Windows. -% See ISPC and COMPUTER. -if ispc && isequal(get(hObject,'BackgroundColor'), get(0,'defaultUicontrolBackgroundColor')) - set(hObject,'BackgroundColor','white'); -end - - -% --- Executes on button press in pushbutton15. -function pushbutton15_Callback(hObject, eventdata, handles) -% hObject handle to pushbutton15 (see GCBO) -% eventdata reserved - to be defined in a future version of MATLAB -% handles structure with handles and user data (see GUIDATA) -newName = get(handles.editboxslidename,'string'); -handles.setslidename = newName; - -% Update handles structure -guidata(hObject, handles); - -% --- Executes on button press in pushbutton16. -function pushbutton16_Callback(hObject, eventdata, handles) -% hObject handle to pushbutton16 (see GCBO) -% eventdata reserved - to be defined in a future version of MATLAB -% handles structure with handles and user data (see GUIDATA) -vid = handles.vid; -% calc var -newimg = double(getsnapshot(vid)); newvar=var(newimg(:)); -%disp on the window -set(handles.var_disp,'string',newvar); - -% --- Executes on button press in pushbutton17. -function pushbutton17_Callback(hObject, eventdata, handles) -% hObject handle to pushbutton17 (see GCBO) -% eventdata reserved - to be defined in a future version of MATLAB -% handles structure with handles and user data (see GUIDATA) -vid = handles.vid; s = handles.s; -% Move Z up -fprintf(s,'T'); -% calc var -newimg = double(getsnapshot(vid)); newvar=var(newimg(:)); -%disp on the window -set(handles.var_disp,'string',newvar); - -% --- Executes on button press in pushbutton18. -function pushbutton18_Callback(hObject, eventdata, handles) -% hObject handle to pushbutton18 (see GCBO) -% eventdata reserved - to be defined in a future version of MATLAB -% handles structure with handles and user data (see GUIDATA) -vid = handles.vid; s = handles.s; -% Move Z down -fprintf(s,'G'); -% calc var -newimg = double(getsnapshot(vid)); newvar=var(newimg(:)); -%disp on the window -set(handles.var_disp,'string',newvar); - -% --- Executes on button press in pushbutton19. -function pushbutton19_Callback(hObject, eventdata, handles) -% hObject handle to pushbutton19 (see GCBO) -% eventdata reserved - to be defined in a future version of MATLAB -% handles structure with handles and user data (see GUIDATA) -vid=handles.vid; -snapshot=getsnapshot(vid); -enh_snapshot=autocontrast(snapshot); -imwrite(snapshot,strcat('DataSet_IISC_Cytocube/Slide1/Image_',handles.setSlidename,'.jpg')); -filename = strcat('DataSet_IISC_Cytocube/Slide1/Enhanced_Image_',handles.setSlidename,'.jpg'); -imwrite(enh_snapshot,filename); -disp('image saved') - -% --- Executes on button press in pushbutton20. -function pushbutton20_Callback(hObject, eventdata, handles) -% this is the debug code -% hObject handle to pushbutton20 (see GCBO) -% eventdata reserved - to be defined in a future version of MATLAB -% handles structure with handles and user data (see GUIDATA) -s = handles.s; src = handles.src; vid=handles.vid; tmr = handles.tmr; -stop(tmr); - -% scan across Z and build a variance graph -% needed for Rajesh's GYTI -% stackcount=50; vararray= zeros(1,stackcount); -% currzpos = str2double(get(handles.currzpos,'string')); -% startingZ = currzpos + (10 * stackcount); -% newZ = strcat('+',sprintf('%06d',abs(startingZ ))) -% fprintf(s,'M'); fprintf(s, newZ ); pause(2); -% -% imgcount=0; -% while(imgcount <= stackcount) -% newimg = double(getsnapshot(vid)); vari = var(newimg(:)) -% vararray(:) = vari; -% imgcount = imgcount + 1; -% fprintf(s,'T'); pause(0.1); -% end -% save('variancee.mat', 'vararray'); -% start(tmr); disp('graphing done'); -% return; - -setslidename = '100f_point13_'; -set(handles.camwait,'string','Focal stack acquisition ongoing...'); -% take a focal stack -currzpos = str2double(get(handles.currzpos,'string')); -originalZ = currzpos -stackcount=100; filecount=0; - -% go down to the starting point -startingZ = currzpos - (10 * (stackcount/2)) -startingZcopy = startingZ; -if(startingZ < 0) - startingZ = strcat('-',sprintf('%06d',abs(startingZ ))); - else - startingZ = strcat('+',sprintf('%06d',abs(startingZ ))); - end; -fprintf(s,'M'); fprintf(s, startingZ ); pause(1); - - -% now sweep up, taking pix. Reach to the max height . -while(filecount <= stackcount) - snapshot=getsnapshot(vid); - filename = strcat(setslidename,'_up_',num2str(filecount), '.jpg'); - imwrite(snapshot,filename); - filecount = filecount + 1; - - newZ = startingZcopy + (10*filecount) ; - if(newZ < 0) - newZ = strcat('-',sprintf('%06d',abs(newZ ))); - else - newZ = strcat('+',sprintf('%06d',abs(newZ ))); - end; - fprintf(s,'M'); fprintf(s, newZ ); pause(0.1); -end - -% % go back to original Z location -newZ = originalZ; -if(newZ < 0) - newZ = strcat('-',sprintf('%06d',abs(newZ ))); - else - newZ = strcat('+',sprintf('%06d',abs(newZ ))); - end; -fprintf(s,'M'); fprintf(s, newZ ); %pause(1); - -% display info -set(handles.camwait,'string','Focal stack acquisition completed'); -start(tmr); -return; - - - -% --- Executes on button press in pushbutton21. -function pushbutton21_Callback(hObject, eventdata, handles) -% hObject handle to pushbutton21 (see GCBO) -% eventdata reserved - to be defined in a future version of MATLAB -% handles structure with handles and user data (see GUIDATA) - s = handles.s; fprintf(s,'W'); - -% --- Executes on button press in pushbutton22. -function pushbutton22_Callback(hObject, eventdata, handles) -% hObject handle to pushbutton22 (see GCBO) -% eventdata reserved - to be defined in a future version of MATLAB -% handles structure with handles and user data (see GUIDATA) - s = handles.s; fprintf(s,'S'); - -% --- Executes on button press in pushbutton23. -function pushbutton23_Callback(hObject, eventdata, handles) -% hObject handle to pushbutton23 (see GCBO) -% eventdata reserved - to be defined in a future version of MATLAB -% handles structure with handles and user data (see GUIDATA) - s = handles.s; fprintf(s,'D'); - -% --- Executes on button press in pushbutton24. -function pushbutton24_Callback(hObject, eventdata, handles) -% hObject handle to pushbutton24 (see GCBO) -% eventdata reserved - to be defined in a future version of MATLAB -% handles structure with handles and user data (see GUIDATA) - s = handles.s; fprintf(s,'A'); - -% --- Executes when user attempts to close figure1. -function figure1_CloseRequestFcn(hObject, eventdata, handles) -% hObject handle to figure1 (see GCBO) -% eventdata reserved - to be defined in a future version of MATLAB -% handles structure with handles and user data (see GUIDATA) -% Hint: delete(hObject) closes the figure -delete(hObject); - - -function [] = query_X(handles) -s = handles.s; fwrite(s,'I'); data = fgetl(s); - -if(data == 'X') - set(handles.currxpos,'string',fgetl(s)); -else - data = fgetl(s); disp(sprintf('not X data - %s',data)); -end - -function [] = query_Y(handles) -s = handles.s; fwrite(s,'O'); data = fgetl(s); - -if(data == 'Y') - set(handles.currypos,'string',fgetl(s)); -else - data = fgetl(s); disp(sprintf('not Y data - %s',data)); -end - -function [] = query_Z(handles) -s = handles.s; fwrite(s,'P'); data = fgetl(s); - -if(data == 'Z') - set(handles.currzpos,'string',fgetl(s)); -else - data = fgetl(s); disp(sprintf('not Y data - %s',data)); -end - - - -% AUTOCONTRAST Automatically adjusts contrast of images to optimum level. -% e.g. autocontrast('Sunset.jpg','Output.jpg') - -function output_img = autocontrast(input_img) - -low_limit=0.004; -up_limit=0.995; -img=input_img; -[m1 n1 r1]=size(img); -img=double(img); -%--------------------calculation of vmin and vmax---------------------- -for k=1:r1 - arr=sort(reshape(img(:,:,k),m1*n1,1)); - v_min(k)=arr(ceil(low_limit*m1*n1)); - v_max(k)=arr(ceil(up_limit*m1*n1)); -end -%---------------------------------------------------------------------- -if r1==3 - v_min=rgb2ntsc(v_min); - v_max=rgb2ntsc(v_max); -end -%---------------------------------------------------------------------- -img=(img-v_min(1))/(v_max(1)-v_min(1)); -output_img = uint8(img.*255); - - - -function gotoX(check,handles) -s=handles.s; - %%%%%%% check if Arduino is responsive and if not, wait %%%%%% - fprintf(s,'7'); while fscanf(s) ~= '7' - end - %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -str = sprintf('%06d',abs(check)); % abs needed so that no +&- in neg numbers - % ensure that too big values dont go in - if (check < -750000) check = -750000; - elseif (check > 750000) check = 750000; - end; - - if(check < 0) - newstr = strcat('-',str); - else - newstr = strcat('+',str); - end; - % end formatting ---------- -------------------------------------------- - fprintf(s,'B'); fprintf(s, newstr ); - -function gotoY(check,handles) -s=handles.s; - %%%%%%% check if Arduino is responsive and if not, wait %%%%%% - fprintf(s,'7'); while fscanf(s) ~= '7' - end - %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% - -str = sprintf('%06d',abs(check)); % abs needed so that no +&- in neg numbers - % ensure that too big values dont go in - if (check < -750000) check = -750000; - elseif (check > 750000) check = 750000; - end; - - if(check < 0) - newstr = strcat('-',str); - else - newstr = strcat('+',str); - end; - % end formatting ---------- -------------------------------------------- - fprintf(s,'N'); fprintf(s, newstr ); - -function gotoZ(check,handles) -s=handles.s; - %%%%%%% check if Arduino is responsive and if not, wait %%%%%% - fprintf(s,'7'); while fscanf(s) ~= '7' - end - %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% - -str = sprintf('%06d',abs(check)); % abs needed so that no +&- in neg numbers - % ensure that too big values dont go in - if (check < -30000) check = -30000; - elseif (check > 30000) check = 30000; - end; - - if(check < 0) - newstr = strcat('-',str); - else - newstr = strcat('+',str); - end; - % end formatting ---------- -------------------------------------------- - fprintf(s,'M'); fprintf(s, newstr ); pause(0.035); - - -function [currmaxvar] = fullAF(handles,travel) -tmr=handles.tmr; - toTurnOnOrNot=1; - if strcmp(get(tmr,'Running'),'off') - toTurnOnOrNot=0; - else - stop(tmr); - end - -%tic -set(handles.camwait,'string','Autofocus in progress...'); -vid=handles.vid; fid=handles.fid; -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -% CRUDE AF. -Z_travel_for_crude = travel; crude_step_count = 200; -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -crude_pulse_count = Z_travel_for_crude / crude_step_count; -crude_curr_var=0; crude_max_var=0; crude_loc_max_var=0; -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -% go to starting Z loc (we've hit limit switch via arduino already so its z=0) -crude_start_loc = str2double(get(handles.currzpos,'string')) - (Z_travel_for_crude/2); -gotoZ(crude_start_loc,handles); pause(0.2); -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -% now keep going up and taking var -crude_curr_loc = crude_start_loc; - -for i=1: crude_pulse_count - % variance - crude_img = double(getsnapshot(vid)); crude_curr_var=var(crude_img(:)); - - if (crude_curr_var > crude_max_var) - crude_max_var = crude_curr_var; - crude_loc_max_var = crude_curr_loc; - end - % update loc - crude_curr_loc = crude_curr_loc + crude_step_count ; - gotoZ(crude_curr_loc,handles); -end -gotoZ(crude_loc_max_var,handles); -pause(1); -%snapshot=getsnapshot(vid); imwrite(snapshot,'aftercrude.bmp'); -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -% fINECRUDE AF. -Z_travel_for_crude = 2000; crude_step_count = 50; -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -crude_pulse_count = Z_travel_for_crude / crude_step_count; -crude_curr_var=0; crude_max_var=0; -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -% go to starting Z loc (we've hit limit switch via arduino already so its z=0) -crude_start_loc = crude_loc_max_var - (Z_travel_for_crude/2); -gotoZ(crude_start_loc,handles); pause(0.2); -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -% now keep going up and taking var -crude_curr_loc = crude_start_loc; - -for i=1: crude_pulse_count - % variance - crude_img = double(getsnapshot(vid)); crude_curr_var=var(crude_img(:)); - - if (crude_curr_var > crude_max_var) - crude_max_var = crude_curr_var; - crude_loc_max_var = crude_curr_loc; - end - % update loc - crude_curr_loc = crude_curr_loc + crude_step_count ; - gotoZ(crude_curr_loc,handles); -end -gotoZ(crude_loc_max_var,handles); -pause(1); -%snapshot=getsnapshot(vid); imwrite(snapshot,'afterfinecrude.bmp'); -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -% The fine AF begins here -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -Ztotaltravel = 200; final_go_backpulses = 0 ; -currZ = crude_loc_max_var; - -% first go above -start_above_loc = currZ - (Ztotaltravel/2); -gotoZ(start_above_loc,handles); -pause(1); -% now build the var array -localAF_loc_array = zeros(1,Ztotaltravel); localAF_var_array = zeros(1,Ztotaltravel); -localAF_curr_loc = start_above_loc; -for q=1:(Ztotaltravel/5) - % location - localAF_loc_array(q) = localAF_curr_loc; - % variance - localAF_img = double(getsnapshot(vid)); localAF_var_array(q)=var(localAF_img(:)); - - % move and update loc - localAF_curr_loc = localAF_curr_loc + 5; gotoZ(localAF_curr_loc,handles); -end - -% Finally go to the max var location -index_of_max_var = find(localAF_var_array == max(localAF_var_array)); -loc_of_max_var = localAF_loc_array(index_of_max_var) - final_go_backpulses ; - -gotoZ(loc_of_max_var,handles); -fprintf(fid,'\r\nCrude/Fine AF (var): %d / %d (%d)',crude_loc_max_var,loc_of_max_var,max(localAF_var_array)); -currmaxvar = max(localAF_var_array) ; -% toc % loc_of_max_var -set(handles.camwait,'string','AF done.'); - -if toTurnOnOrNot ==1 - start(tmr); -end -pause(1); - - - -% --- Executes on button press in resetbutton. -function resetbutton_Callback(hObject, eventdata, handles) -% hObject handle to resetbutton (see GCBO) -% eventdata reserved - to be defined in a future version of MATLAB -% handles structure with handles and user data (see GUIDATA) -s = handles.s; tmr=handles.tmr; resetbutton=handles.resetbutton; -set(resetbutton,'enable','off'); -set(handles.camwait,'string','System resetting...'); -stop(tmr); -fclose(s); fopen(s); -pause(2); -fprintf(s,'Q'); -while fscanf(s) ~= 'S' - end; -start(tmr); -set(handles.camwait,'string','system at home location.'); -set(resetbutton,'enable','on'); -return; - - -% --- Executes during object deletion, before destroying properties. -function figure1_DeleteFcn(hObject, eventdata, handles) -% hObject handle to figure1 (see GCBO) -% eventdata reserved - to be defined in a future version of MATLAB -% handles structure with handles and user data (see GUIDATA) - -if ~isempty(instrfind) - fclose(instrfind); - delete(instrfind); -end - -try - stop(tmr); - fid=handles.fid; fclose(fid); - vid = handles.vid; stoppreview(vid); delete(vid); -catch - clear all; - clc; -end - -%s=handles.s; fclose(s); delete(s); -disp('Killed all before exiting'); - - -% --- Executes during object creation, after setting all properties. -function figure1_CreateFcn(hObject, eventdata, handles) -% hObject handle to figure1 (see GCBO) -% eventdata reserved - to be defined in a future version of MATLAB -% handles empty - handles not created until after all CreateFcns called - - -function [] = bestpoints(hObject,handles,Xvar) -handles = guidata(hObject); -s=handles.s; -Avar = handles.Avar; Bvar = handles.Bvar; Cvar = handles.Cvar; - if ((Cvar < Bvar) && (Cvar < Avar)) - if ( Xvar > Cvar) - fprintf(s,'Y'); - handles.Cvar = Xvar; - disp('changed C'); - end - end - if ((Avar < Bvar) && (Avar < Cvar)) - if ( Xvar > Avar) - fprintf(s,'E'); - handles.Avar = Xvar; - disp('changed A'); - end - end - if ((Bvar < Avar) && (Bvar < Cvar)) - if ( Xvar > Bvar) - fprintf(s,'R'); - handles.Bvar = Xvar; - handles.Bvar - disp('changed B'); - end - end - - %update handles - guidata(hObject, handles); diff --git a/src/python/0.jpg b/src/python/0.jpg deleted file mode 100644 index d1de1d897ba2c5646447083addbaf7d9fabc5a82..0000000000000000000000000000000000000000 GIT binary patch literal 0 HcmV?d00001 literal 7125 zcmb7JcQhPM*IrRp?~7npSt+7~=+UCCC=tE)1WO3f`wtPKljyNJtF2&_5G{HqTCBRd zC3=na$@`x3e&_w`JKvr8XU^Pt&Ye4VW}dlo^Xq02K&`6$Tp56ehX7?~L8 znP}-j^nXF{@NdTu5RwoQlF(C-QPBUt<)#%tLk#Ev^x)%h0`Ab@;nU#VbO68rJix7K zx90vwh=7E|cmyQ)cW%37sR4NS_;`c_L?m~J@c$~^s^3n5h6qT@At*;or)5RYDeoGb z0D?Zzw$7<+8|4xrQFxb_i+vTc_v03T6%T+%_}3f%E4RamfOqhSZ+k^(ZsG6X69WHw z=3g5Bf~O(mkRzfM)Uu-EyoIhD&1u6zpX||d3CV-Bf8JmKE`-J4~!JSiK*Ozl{Xza7|hkTTdI2K&5 z&R}I0(OH&^oSq(tc4FwfDB)23Fy%S4YRSJZGylh&096Xdv0lmc>v%d=sL$*X+oR!c zPKf)77&5nfFc&g#_fk1X?|p{jX)hS31f$-g`Sj%Ld^fq37lrx3XCWT~ ze_B(>76~4n88r3R6fC_YB#eyA2xrt)Kli@)fNN_(U)Q+xz8x(Cep2F=y-rfl(gO2R zrNde1)meu8V)0>-B{jAqIDS-sNYijZ?uxni^T&Hq&F}$lO4c^pA5uF3eRlk#OBG@s z3g645%W4yg>L~g(zIVG6)|wW)6^Eyuv@9t^uz^0b1Vw}`S+cwyJ<=^=wXo1XuRj+F zZYde(GS5V`v;JNtK9-qM@XTU#^io_Oq1$pSk3#-lM)$trk4b*WGFqPFb2$*z0{?wg zu`w_Gbi%4$2ua;f)@-#BsAimnucql+k?1#MXUVh`z6GJnN*&7SVCc7`3FB%NW2 z!`D&SHz1bbvZ}zJC7q^VK~qSec`Pf&Qqt9$9;0#aCx-rz1@zd;B4a!mPoap}va&fx z!!MMcXz68Tt*x^1rjggYAF{QQCNa3bS;*&&!hL1J_dAS)VGzh3kcA>yF+4 zzG;EpWt>>iFp!zdQ>45YS7WKO`$XO4Pu6frq#Br~OJ#3dIpsU`Qb+a=6F8jVAZa=6 zlrl?%Qc*4VRj`<%Qa8t^R_`PnxlCN+pjf`iQRiAi)?M1MnKeJ+eF8BuD%YAx zBU}KaIWhM`cF-q1y4;`(Q@rP*hO=JAi<*&oBYj=F68ThwlZuKZN)qMW+c}ugqbe=? za#v%E7fZjK>LSBkqYvH)i66dI{(i9HZ5bnOq3U2%TEbaW6n0EEfMs>*_;D)Tu_!F; z%7tJeeN5B7*kLL7LW(l`kkp2>11C@tEF!VbOw&_gJM{>)z3^%>-S4$$AK2|>FUmDq z?(V%YIU=GJH(7DFZkqP^R<493`--gfXa$};N=g7`Ie5=PW310EEb&`GK`RRcnxm+w z@_;xZLO$B*e%Vj^{*UnXd`IgWfZIQ^$$I1!;1cEa4NR`|N2u%RTdGy9K5S_4FS@C1 z5EX=L9PNJbSu5Z*w~%%>0uSXiuzaE&MmI^pS&Ki?eNn3P@akppaTb;b5E1ENkj#8? zIWE}5JbO7Q^6Iey$YwCuX1qgone3ex%l!%g-*SHgyW>*k3|lR|dGD8xGJw4t0~%i%!}*V#nRalw zRC9;$wXro~9`PtP$1guv$E+DPPDGWHrA)!3hr4Jmo4%$@opGE7$HFXn#j?3DQlUjl zaUKP{?CFlf*smufip2OyoscjaFOsRW5x5z1V^}IDFnm5RqijCJCx@mNM)z2x4S$cZ zrif?R(ms(pQQ^al)UX2WFEoFbW~MGKm!qY9x0bsh7>%UumWK8;mlsaV7FuJ42v!m2 zHp_ZkROh{tF(r{7%ewol!XsinyIv_N+L{3Iq>Uikp}v#31nqXerdl4v*Mzj)XY-No zX*v_^G8z~Ur9J>9_*?y+{yO2XosSk>MdAzzUr%heN&D3YU(ke(Wqd>YV^Tr~#yl{f z(^PeW6dCwarf>Bcih8|H3lG*ae9RxJe2Hj)54uM4Yk|P_5x3#R$w^(Ao<4mv7}6Xa zP;Bk;_RqJt0Ya1_wF(r7lx7%4sK#Q+wp3VmbIx+T0er3ATGdnU>w|LyP5XIirli+(Ty=*( z5-$7AWHM;*u(?KfHy@$$iph_X^qhxDjFA+jRK>&SAH^4`H8vqz)xj;Tey0%F5=#Wg+0~=Xycj&x0D%XrXa$$QDLy7%5r@XUY zWdJW(uN&K74zTng$sGplJ$>i0=u7jG(@94IWcuQRmFMT3M3e(}h8BL=T7|WHVJUjc zgb=*eZwC4?qd$076tM?ILQ~oI*!O|KMjorNKO~=7c(MiV!qrN*^&S&7jGtl?-50D* zxbQ2WJxAU77g8AMaEGVPh|{7{6C>DTAbKy6aXI>(Sca*T43s^jlGTPVgEaBdMvCg! z@u`KprHLGo5V++{UR2<6>d92vCzJr=!_vsfh=})`oE(2ojN2uxH!RmE${w#xvoAV+ zew-Iio-FlF_G*lWH>&X4fQy?(gsF5)LP0Dep`+g9gwE@V^jMV4j(05a225T`&P*v_ zOXDt4Y0la&$6VmIEVg|wtZa&ivZ>PqLrE{(VaZ*n%VkaS7y=zMw=ZSU9k>CwEXiz% zcRXZMysU;V26n*4@|2AK; zKdC_$_iYd#b{a%|X>Jy<>De%Sf5*9`LJ~JfZZXjN`@R4O}i2qR)STwMz3!Gt452(b2}{|NZp@r zy_T1I6&M~ZI}W{m@AED6#OPyABEkU1Lk1ZO`Po7WPh+Zs}kmrz9(M#B3d;uli6c0{A`?UYISU6Ub|a6GZpJuh6zG}K*N zA`WhYaapUk3|*A}6~;92hcip7%P!m#u?QrQPLs;KETZtJFD$5AEbg%I{X-h{TKDsW z*3-MGelNvxZ{hv;CB23){Ms~58Rlf7=~jxyt~PN>h$$m`{gE!0jre7 zYX)5;2xvN}y;pr7O!J^!Fip{$7sm?9Wp#=q3A55qY1*6EqFtyUR_$r{_b|Kw?fI(D zULvdwv50wA(ZOVlj*$a%`@#*tAZR9MYj?TZI>9xmZ+P;{f1eU&j!CuYzhU?IO!*Kb zKnC$Zo7QvG&&P7?v;3wbSnDUc<~1WC%;qp%c{3d+S1iA@{blAQGJSeF=e43{tg@)e zJelbfd59FTZr6xA8TxS0gG{Zw!mDh^_Kt5*QR^jX?TEE>d2Yt3z0b8Cl8V0?Hia?0(}f#9<2M$Nuk> zC_DTk-4$Xb{CGoUZOXf*oezq09agtbWuV z(q8Uvz`H$(u%iA$}Ew>O1M`MS(uwS zP=Ivejb);3kUm&&;i5`EB11j@+AlKMsge2k9-S49zmWcs@+?h1!Q^v4}++Lny?}y?x63Phb36=kunHK9W|; zL$;!C>VqGWpWTn%b=%YX<8Sy}d*dEU1Nre*ZnY+1sB>*qi&oW-{`cButW%QpR`Xrr z@hXdy;>%fgD*aR|7ak{bvsam2$7BF;>G&Ejs>*pgzMkR7k>h_J^)=obdW2;Cp z!f4*OK+4*lAb#UIi1WULEi~YrcOQpviITnFDqB-e!JQRs4y+o2LT5=(=;Hd?`c7qd*M% zYwVn}UDJ9$l_s&?l0fJyV)3v*Iy(jh|qjYXn-~o-#wH~ z`qUOdlAlm5<~sO*Um@AQ#>jE-yD8EFB2(Fnwrf4}_j%Nyq2U;L3d){Tc79?USO zE^}Gj@QB2?9h32nl&FQ~<4?*Ci!>9qI_le0W{B#bu#clpYrz(;V~ZQhN^I|H z5udOvNyQ1?0Muku0H6Aaca?W?z|%$}$P!NO0`prcV;%PrbHBg^yd#DUn)6;gTnWHM zxv8-lV;dG-DXm^I7FDTr`Ym726vfv;SUMkeWQ1(ya%$bLFz*zzGx3u%vZ9=O z?IEJa(;cxB)xFMSo>UzF72l&jcAv<*FDc2H<|PZkyr^K^g!;yspo*m#i)Khecs%_(%r zJ1I<}GGf((#Kcb7j&g9TS74Dh8h%gudF-qA%?!c^Hs;?VyrzbyJw#%9Po{AeDw4nE zBr($nudh#B{12CMMKiAS3a?O3~ggqwvWPq02vzF@LJx#u2yayiEYh^)asCW8;?{mTAcnUt*Bz32<_ zSGeGp5&(yYAM=Ct?$%Ji)V!LWY&wUI=9h;h>MO%aL7Ft|ZzIHkGOyhO6H1Qo6*iyz zq50G#e6ilR&?Q#qV+S@+EhHNMu`$r8Ta7MqH?}|4)}+}3&LLhELltmnz|n@y!bxWpu^PgRNz}d?40Xe_!?Eh zp0;-^^{ire8gWgXvQqX!Oig{S0@iS5uP}9niKAnewLPMyJb>4&UoQ;9pVwdn$MFy! zVY*+~Aadb;b5pNkmIBHWhQ(KkO~U$0wzP4P-xj30F+Qs+QowkF2@i6yN8H7B&PPH5 zmF@k#S_b`6lRRI>-L8Sec{`~D_N>0D&1=aSD2B@mee2YWSRD?bR2_$D26Q&_PTOB@?;)^zXF{(%U zT^S}8>X+9aH@UTOm7M3nz{q0GYc?kCmh9H{o%CLx1A4v`YkW zSwV9$N|t)_cSFm$l(!@inS=MaGptJugeyBygeV{Z#LA^Gr4*n4Sw93?4EDXv=_124 zc*ozRu0?n4j~t(Rmy!#KYNddT(t+}B*g+e9cSz#=f#7jDYxAC=jH+$}=%j1hR%LJ6 z_e?@nL3Gz+mR>|j<}~1oJ_XF9@Uv|}Hj&hm25NOpDg1E#Ea*AtUgCp}gDG@PdyYjI z7iErOLXPpi6s?Z>S%FPnQY@bvtAN}d&mPLmEEj$ZmE7ouZ(#(cUE7x17KW9y=lDRL z4tbhJ_&M?KhHt5q4|OupCM|En-<8b$_xq41ubQD1=Q&ztB=SZxPIcy$&dCP4)`lOa*T1V@5NFiB_zndYtP$AQTNARA?#aH3O;RPAwB`o9!rflD@{LdKL zQxZ(?&VbQ(?xvIYG%+MKyX2kdortVI8F`WrTUg++B0(!Vb@;nvwARt~Re3^K#h_+&m|^d~9lS1AwpYacGS4(f^cx%Tksxs0n&Dmy}&%-SSE-{apaF zu|w@qdldLUN>(HkHJx-~%T!d|;CU_)d(K)OYHFog%~)*50wTLlsCv!FHk9K?a6#ET zv_1B6m_%lvv#~`ARj%B2{F!{-srhaTxd-q3IW5CD_8lT7w~U!e;UHD=HPWo3u_rF9 z=vb0vqRKaM6BE9SbffAC=SK%1j$=%k3&*&iHvmpU46xhBS(%Qc-?OkLv|;ipPzUzL z1AlOSolP^W2-NgNWDY8p=3G>QO=K^%g7#DXXf^c&mhoUcq-{STiz6=hcV?v*cU{i- z*3=0~MQiH=*U;x|pF>aBs9YP(_t#_?5hCEou crude_max_var: - crude_max_var = crude_curr_var - crude_loc_max_var = crude_curr_loc - crude_curr_loc = crude_curr_loc + crude_step_count - self.gotoZ(crude_curr_loc) - time.sleep(0.175) - self.gotoZ(crude_loc_max_var) - # Fine-crude AF - Z_travel_for_crude = 1000; crude_step_count = 50; - crude_loc_max_var = 0; crude_max_var = 0 - crude_pulse_count = Z_travel_for_crude / crude_step_count; - crude_start_loc = self.currzpos - (Z_travel_for_crude/2); - self.gotoZ(crude_start_loc); - crude_curr_loc = crude_start_loc; - for i in range(int(crude_pulse_count)): - snapshot = self.data - crude_curr_var = np.var(cv2.filter2D(snapshot,-1,kernel)) - print(crude_curr_var,'||',self.currzpos) - if crude_curr_var > crude_max_var: - crude_max_var = crude_curr_var - crude_loc_max_var = crude_curr_loc - crude_curr_loc = crude_curr_loc + crude_step_count - self.gotoZ(crude_curr_loc) - time.sleep(0.075) - self.gotoZ(crude_loc_max_var) - # Fine AF - Z_travel_for_crude = 120; crude_step_count = 5; - crude_loc_max_var = 0;crude_max_var = 0 - crude_pulse_count = Z_travel_for_crude / crude_step_count; - crude_start_loc = self.currzpos - (Z_travel_for_crude/2); - self.gotoZ(crude_start_loc); - crude_curr_loc = crude_start_loc; - for i in range(int(crude_pulse_count)): - snapshot = self.data - crude_curr_var = np.var(snapshot) - print(crude_curr_var,'||',self.currzpos) - if crude_curr_var > crude_max_var: - crude_max_var = crude_curr_var - crude_loc_max_var = crude_curr_loc - crude_curr_loc = crude_curr_loc + crude_step_count - self.gotoZ(crude_curr_loc) - time.sleep(0.025) - self.gotoZ(crude_loc_max_var) - ts_stop = time.time() - print('time taken for autofocusing:'+str(ts_stop-ts_start)+' secs') - - def parameter(self): - image = self.data - img = cv2.medianBlur(image,5) - cimg = cv2.cvtColor(img,cv2.COLOR_BGR2GRAY) - circles = cv2.HoughCircles(cimg,cv2.HOUGH_GRADIENT,1,35,param1=50,param2=30,minRadius=10,maxRadius=45) - area = 0 - try: - circles = np.uint16(np.around(circles));#print('No.of Circles:',len(circles[0,:])) - for i in circles[0,:]: - # Total area - area = area + (3.1415 * i[2] * i[2]) - except: - print("No circles detected") - ret,im_th = cv2.threshold(cimg,np.average(cimg),255,cv2.THRESH_BINARY_INV) - foreground_area = np.count_nonzero(im_th) - param = area/foreground_area - if(param == 0): - return (foreground_area/(1280*1024)) - return param - - def focus(self,travel,step_count): - ts_start = time.time() - # FineCrude - Z_travel_for_crude = travel; crude_step_count = step_count; - crude_loc_max_var = 0; crude_max_var = 0 - crude_pulse_count = Z_travel_for_crude / crude_step_count; - crude_start_loc = self.currzpos - (Z_travel_for_crude/2); - self.gotoZ(crude_start_loc); - crude_curr_loc = crude_start_loc; - kernel = np.ones((5,5),np.float32)/9 - for i in range(int(crude_pulse_count)): - snapshot = self.data - crude_curr_var = np.var(cv2.filter2D(snapshot,-1,kernel)) - #print(crude_curr_var,'||',self.currzpos) - if crude_curr_var > crude_max_var: - crude_max_var = crude_curr_var - crude_loc_max_var = crude_curr_loc - crude_curr_loc = crude_curr_loc + crude_step_count - self.gotoZ(crude_curr_loc) - time.sleep(0.075) - self.gotoZ(crude_loc_max_var) - # Fine AF - Z_travel_for_crude = step_count*2; crude_step_count = 3; - crude_loc_max_var = 0;crude_max_var = 0 - crude_pulse_count = Z_travel_for_crude / crude_step_count; - crude_start_loc = self.currzpos - (Z_travel_for_crude/2); - self.gotoZ(crude_start_loc); - crude_curr_loc = crude_start_loc; - for i in range(int(crude_pulse_count)): - snapshot = self.data - crude_curr_var = np.var(snapshot) - #print(crude_curr_var,'||',self.currzpos) - if crude_curr_var > crude_max_var: - crude_max_var = crude_curr_var - crude_loc_max_var = crude_curr_loc - crude_curr_loc = crude_curr_loc + crude_step_count - self.gotoZ(crude_curr_loc) - time.sleep(0.025) - self.gotoZ(crude_loc_max_var) - ts_stop = time.time() - print('time taken for autofocusing:'+str(ts_stop-ts_start)+' secs') - - #def focalstack(self,travel): - - - - def xMinus(self): - self.ser.write(b'D') - self.currxpos = self.currxpos - self.xFov - self.label_13.setText(self._translate("MainWindow", str(self.currxpos))) - def xPlus(self): - self.ser.write(b'A') - self.currxpos = self.currxpos + self.xFov - self.label_13.setText(self._translate("MainWindow", str(self.currxpos))) - def yMinus(self): - self.ser.write(b'S') - self.currypos = self.currypos - self.yFov - self.label_14.setText(self._translate("MainWindow", str(self.currypos))) - def yPlus(self): - self.ser.write(b'W') - self.currypos = self.currypos + self.yFov - self.label_14.setText(self._translate("MainWindow", str(self.currypos))) - def zDown(self): - self.ser.write(b'G') - self.currzpos = self.currzpos - 1 - self.label_15.setText(self._translate("MainWindow", str(self.currzpos))) - def zUp(self): - self.ser.write(b'T') - self.currzpos = self.currzpos + 1 - self.label_15.setText(self._translate("MainWindow", str(self.currzpos))) - def gotoX(self, xValue): - xValue = int(xValue) - if self.currxpos != xValue: - xValue_str = '#' + str("%($)07d" % {"$":xValue}) - self.ser.write(b'B') - self.ser.write(xValue_str.encode()) - time.sleep(abs(self.currxpos-xValue)/self.Xpulserate) - self.currxpos = int(xValue) - self.label_13.setText(self._translate("MainWindow", str(self.currxpos))) - def gotoY(self, yValue): - yValue = int(yValue) - if self.currypos != yValue: - yValue_str = '#' + str("%($)07d" % {"$":yValue}) - self.ser.write(b'N') - self.ser.write(yValue_str.encode()) - time.sleep(abs(self.currypos-yValue)/self.Ypulserate) - self.currypos = int(yValue) - self.label_14.setText(self._translate("MainWindow", str(self.currypos))) - def gotoZ(self, zValue): - zValue = int(zValue) - if self.currzpos != zValue: - zValue_str = '#' + str("%($)07d" % {"$":zValue}) - self.ser.write(b'M') - self.ser.write(zValue_str.encode()) - time.sleep(abs(self.currzpos-zValue)/self.Zpulserate) - self.currzpos = int(zValue) - self.label_15.setText(self._translate("MainWindow", str(self.currzpos))) - - def bloodsmear(self): - self.gotoX('0') - self.gotoY('0') - self.gotoZ('0') - self.gotoY(self.ymiddle);time.sleep(2); - self.autoFocus() - Zval = []; param_y0 = []; Xpos = []; - xstep = round((self.x1-self.x0)/11); - for xpos in range(self.x0,self.x1,xstep): - self.gotoX(xpos) - self.focus(2000,50) - Zval.append(self.currzpos) - Xpos.append(self.currxpos) - snap = self.data - snapshot = PIL.Image.fromarray(snap,'RGB') - snapshot.save('snap@'+str(xpos)+'.jpg') - param_y0.append(self.parameter()) - print(np.asarray(param_y0)) - index = np.argmax((param_y0)) - xbest = Xpos[index] - self.gotoX(Xpos[index]) - self.gotoZ(Zval[index]);time.sleep(2); - param_y1 = [];Xpos = []; Zval = []; - if(xbest<=xstep): - for xpos in range(xbest,xbest+xstep*2,12581): - self.gotoX(xpos) - self.focus(500,50) - Zval.append(self.currzpos) - Xpos.append(self.currxpos) - snap = self.data - snapshot = PIL.Image.fromarray(snap,'RGB') - snapshot.save('snap@'+str(xpos)+'.jpg') - param_y1.append(self.parameter()) - elif(xbest>self.x1): - for xpos in range(xbest-xstep*2,xbest,12581): - self.gotoX(xpos) - self.focus(500,50) - Zval.append(self.currzpos) - Xpos.append(self.currxpos) - snap = self.data - snapshot = PIL.Image.fromarray(snap,'RGB') - snapshot.save('snap@'+str(xpos)+'.jpg') - param_y1.append(self.parameter()) - else: - for xpos in range(xbest-xstep,xbest+xstep,12581): - self.gotoX(xpos) - self.focus(500,50) - Zval.append(self.currzpos) - Xpos.append(self.currxpos) - snap = self.data - snapshot = PIL.Image.fromarray(snap,'RGB') - snapshot.save('snap@'+str(xpos)+'.jpg') - param_y1.append(self.parameter()) - index = np.argmax(np.asarray(param_y1)) - param = np.where(np.asarray(param_y1),1,0) - self.gotoY(0) - if(np.sum(param[1:4]) == 3): - x1 = Xpos[1]; - x2 = Xpos[3]; - self.gotoX(x1);self.focus(500,50);self.ser.write(b'R') - self.gotoX(x2);self.focus(500,50);self.ser.write(b'E') - self.gotoY(self.y1);self.focus(500,50);self.ser.write(b'Y') - xA = x1; xB = x2; - yC = self.y1; yB = 0; - numofX = round((xB-xA)/self.xFov); - numofY = round((yC-yB)/self.yFov); - self.ser.write(b'Z') - while(self.ser.read() != 'S'): - print('.') - - rowcount = 0; - filecount = 0; - print('Starting Image Capture...') - while(rowcount <= numofY): - while(filecount <= numofX): - snap = PIL.Image.fromarray(self.data,'RGB') - snapshot.save('Image_'+str(rowcount)+'_'+str(filecount)+'.jpg') - filecount = filecount + 1 - filecount = 0 - rowcount = rowcount + 1 - elif(np.sum(param[0:3] > np.sum(param[2:5]))): - x1 = Xpos[0]; - x2 = Xpos[2]; - self.gotoX(x1);self.focus(500,50);self.ser.write(b'R') - self.gotoX(x2);self.focus(500,50);self.ser.write(b'E') - self.gotoY(self.y1);self.focus(500,50);self.ser.write(b'Y') - xA = x1; xB = x2; - yC = self.y1; yB = 0; - numofX = round((xB-xA)/self.xFov); - numofY = round((yC-yB)/self.yFov); - self.ser.write(b'Z') - while(self.ser.read() != 'S'): - print('.') - rowcount = 0; - filecount = 0; - print('Starting Image Capture...') - while(rowcount <= numofY): - while(filecount <= numofX): - snap = PIL.Image.fromarray(self.data,'RGB') - snapshot.save('Image_'+str(rowcount)+'_'+str(filecount)+'.jpg') - filecount = filecount + 1 - filecount = 0 - rowcount = rowcount + 1 - elif(np.sum(param[0:3] < np.sum(param[2:5]))): - x1 = Xpos[2]; - x2 = Xpos[4]; - self.gotoX(x1);self.focus(500,50);self.ser.write(b'R') - self.gotoX(x2);self.focus(500,50);self.ser.write(b'E') - self.gotoY(self.y1);self.focus(500,50);self.ser.write(b'Y') - xA = x1; xB = x2; - yC = self.y1; yB = 0; - numofX = round((xB-xA)/self.xFov); - numofY = round((yC-yB)/self.yFov); - self.ser.write(b'Z') - while(self.ser.read() != 'S'): - print('.') - - rowcount = 0; - filecount = 0; - print('Starting Image Capture...') - while(rowcount <= numofY): - while(filecount <= numofX): - snap = PIL.Image.fromarray(self.data,'RGB') - snapshot.save('Image_'+str(rowcount)+'_'+str(filecount)+'.jpg') - filecount = filecount + 1 - filecount = 0 - rowcount = rowcount + 1 - else: - print('No Best region detected!') - self.resetOrigin() - - def test(self): - #var = round(np.var(self.data)) - #self.label_8.setText(self._translate("MainWindow", str(var))) - self.focus(500,50) - - -if __name__ == '__main__' : - app = QtWidgets.QApplication(sys.argv) - x = gui() - x.main() - sys.exit(app.exec_()) diff --git a/src/python/slide_scanner_test.py b/src/python/slide_scanner_test.py deleted file mode 100644 index d7d4f29..0000000 --- a/src/python/slide_scanner_test.py +++ /dev/null @@ -1,419 +0,0 @@ -# -*- coding: utf-8 -*- - -# Form implementation generated from reading ui file 'slide_scanner_test.ui' -# -# Created by: PyQt5 UI code generator 5.6 -# -# WARNING! All changes made in this file will be lost! - -from PyQt5 import QtCore, QtGui, QtWidgets - -class Ui_MainWindow(object): - def setupUi(self, MainWindow): - MainWindow.setObjectName("MainWindow") - MainWindow.setWindowModality(QtCore.Qt.WindowModal) - MainWindow.resize(1024, 768) - font = QtGui.QFont() - font.setPointSize(8) - MainWindow.setFont(font) - icon = QtGui.QIcon() - icon.addPixmap(QtGui.QPixmap("F:/IITT_Logo/0.jpg"), QtGui.QIcon.Normal, QtGui.QIcon.Off) - MainWindow.setWindowIcon(icon) - MainWindow.setAutoFillBackground(False) - MainWindow.setStyleSheet("background-color: rgb(90, 90, 90);") - self.centralwidget = QtWidgets.QWidget(MainWindow) - self.centralwidget.setObjectName("centralwidget") - self.logoView = QtWidgets.QLabel(self.centralwidget) - self.logoView.setGeometry(QtCore.QRect(20, 20, 50, 50)) - self.logoView.setObjectName("logoView") - self.label = QtWidgets.QLabel(self.centralwidget) - self.label.setGeometry(QtCore.QRect(80, 20, 461, 51)) - font = QtGui.QFont() - font.setPointSize(24) - self.label.setFont(font) - self.label.setStyleSheet("color: rgb(255, 255, 255);") - self.label.setObjectName("label") - self.slideImageView = QtWidgets.QLabel(self.centralwidget) - self.slideImageView.setGeometry(QtCore.QRect(20, 180, 640, 512)) - self.slideImageView.setBaseSize(QtCore.QSize(640, 512)) - self.slideImageView.setStyleSheet("background-color: rgb(85, 255, 127);") - self.slideImageView.setObjectName("slideImageView") - self.label_2 = QtWidgets.QLabel(self.centralwidget) - self.label_2.setGeometry(QtCore.QRect(220, 150, 221, 31)) - font = QtGui.QFont() - font.setPointSize(18) - self.label_2.setFont(font) - self.label_2.setStyleSheet("color: rgb(255, 255, 255);") - self.label_2.setObjectName("label_2") - self.pushButton = QtWidgets.QPushButton(self.centralwidget) - self.pushButton.setEnabled(True) - self.pushButton.setGeometry(QtCore.QRect(680, 520, 141, 27)) - sizePolicy = QtWidgets.QSizePolicy(QtWidgets.QSizePolicy.Fixed, QtWidgets.QSizePolicy.Fixed) - sizePolicy.setHorizontalStretch(0) - sizePolicy.setVerticalStretch(0) - sizePolicy.setHeightForWidth(self.pushButton.sizePolicy().hasHeightForWidth()) - self.pushButton.setSizePolicy(sizePolicy) - font = QtGui.QFont() - font.setPointSize(12) - self.pushButton.setFont(font) - self.pushButton.setCursor(QtGui.QCursor(QtCore.Qt.PointingHandCursor)) - self.pushButton.setStyleSheet("color: rgb(255, 255, 255);\n" -"background-color: rgb(0, 0, 0);\n" -"border-radius:10px;\n" -"") - self.pushButton.setCheckable(False) - self.pushButton.setAutoDefault(False) - self.pushButton.setObjectName("pushButton") - self.pushButton_2 = QtWidgets.QPushButton(self.centralwidget) - self.pushButton_2.setGeometry(QtCore.QRect(870, 520, 141, 27)) - sizePolicy = QtWidgets.QSizePolicy(QtWidgets.QSizePolicy.Fixed, QtWidgets.QSizePolicy.Fixed) - sizePolicy.setHorizontalStretch(0) - sizePolicy.setVerticalStretch(0) - sizePolicy.setHeightForWidth(self.pushButton_2.sizePolicy().hasHeightForWidth()) - self.pushButton_2.setSizePolicy(sizePolicy) - font = QtGui.QFont() - font.setPointSize(12) - self.pushButton_2.setFont(font) - self.pushButton_2.setCursor(QtGui.QCursor(QtCore.Qt.PointingHandCursor)) - self.pushButton_2.setStyleSheet("color: rgb(255, 255, 255);\n" -"background-color: rgb(0, 0, 0);\n" -"border-radius:10px;") - self.pushButton_2.setObjectName("pushButton_2") - self.pushButton_3 = QtWidgets.QPushButton(self.centralwidget) - self.pushButton_3.setGeometry(QtCore.QRect(734, 300, 51, 23)) - self.pushButton_3.setCursor(QtGui.QCursor(QtCore.Qt.PointingHandCursor)) - self.pushButton_3.setStyleSheet("color: rgb(255, 255, 255);\n" -"background-color: rgb(0, 0, 0);\n" -"border-radius:10px;") - self.pushButton_3.setObjectName("pushButton_3") - self.pushButton_4 = QtWidgets.QPushButton(self.centralwidget) - self.pushButton_4.setGeometry(QtCore.QRect(680, 330, 51, 23)) - self.pushButton_4.setCursor(QtGui.QCursor(QtCore.Qt.PointingHandCursor)) - self.pushButton_4.setStyleSheet("color: rgb(255, 255, 255);\n" -"background-color: rgb(0, 0, 0);\n" -"border-radius:10px;") - self.pushButton_4.setCheckable(False) - self.pushButton_4.setAutoDefault(True) - self.pushButton_4.setObjectName("pushButton_4") - self.pushButton_5 = QtWidgets.QPushButton(self.centralwidget) - self.pushButton_5.setGeometry(QtCore.QRect(790, 330, 51, 23)) - self.pushButton_5.setCursor(QtGui.QCursor(QtCore.Qt.PointingHandCursor)) - self.pushButton_5.setStyleSheet("color: rgb(255, 255, 255);\n" -"background-color: rgb(0, 0, 0);\n" -"border-radius:10px;") - self.pushButton_5.setObjectName("pushButton_5") - self.pushButton_6 = QtWidgets.QPushButton(self.centralwidget) - self.pushButton_6.setGeometry(QtCore.QRect(734, 360, 51, 23)) - self.pushButton_6.setCursor(QtGui.QCursor(QtCore.Qt.PointingHandCursor)) - self.pushButton_6.setStyleSheet("color: rgb(255, 255, 255);\n" -"background-color: rgb(0, 0, 0);\n" -"border-radius:10px;") - self.pushButton_6.setObjectName("pushButton_6") - self.pushButton_7 = QtWidgets.QPushButton(self.centralwidget) - self.pushButton_7.setGeometry(QtCore.QRect(880, 300, 75, 23)) - self.pushButton_7.setCursor(QtGui.QCursor(QtCore.Qt.PointingHandCursor)) - self.pushButton_7.setAutoFillBackground(False) - self.pushButton_7.setStyleSheet("color: rgb(255, 255, 255);\n" -"background-color: rgb(0, 0, 0);\n" -"border-radius:10px;") - self.pushButton_7.setObjectName("pushButton_7") - self.pushButton_8 = QtWidgets.QPushButton(self.centralwidget) - self.pushButton_8.setGeometry(QtCore.QRect(880, 360, 75, 23)) - self.pushButton_8.setCursor(QtGui.QCursor(QtCore.Qt.PointingHandCursor)) - self.pushButton_8.setStyleSheet("color: rgb(255, 255, 255);\n" -"background-color: rgb(0, 0, 0);\n" -"border-radius:10px;") - self.pushButton_8.setObjectName("pushButton_8") - self.label_3 = QtWidgets.QLabel(self.centralwidget) - self.label_3.setGeometry(QtCore.QRect(680, 260, 181, 21)) - sizePolicy = QtWidgets.QSizePolicy(QtWidgets.QSizePolicy.Minimum, QtWidgets.QSizePolicy.Fixed) - sizePolicy.setHorizontalStretch(0) - sizePolicy.setVerticalStretch(0) - sizePolicy.setHeightForWidth(self.label_3.sizePolicy().hasHeightForWidth()) - self.label_3.setSizePolicy(sizePolicy) - font = QtGui.QFont() - font.setPointSize(12) - self.label_3.setFont(font) - self.label_3.setStyleSheet("color: rgb(255, 255, 255);") - self.label_3.setObjectName("label_3") - self.lineEdit = QtWidgets.QLineEdit(self.centralwidget) - self.lineEdit.setGeometry(QtCore.QRect(770, 420, 113, 20)) - self.lineEdit.setObjectName("lineEdit") - self.label_4 = QtWidgets.QLabel(self.centralwidget) - self.label_4.setGeometry(QtCore.QRect(690, 420, 81, 21)) - font = QtGui.QFont() - font.setPointSize(12) - self.label_4.setFont(font) - self.label_4.setStyleSheet("color: rgb(255, 255, 255);") - self.label_4.setObjectName("label_4") - self.label_5 = QtWidgets.QLabel(self.centralwidget) - self.label_5.setGeometry(QtCore.QRect(690, 480, 81, 21)) - font = QtGui.QFont() - font.setPointSize(12) - self.label_5.setFont(font) - self.label_5.setStyleSheet("color: rgb(255, 255, 255);") - self.label_5.setObjectName("label_5") - self.lineEdit_2 = QtWidgets.QLineEdit(self.centralwidget) - self.lineEdit_2.setGeometry(QtCore.QRect(770, 480, 113, 20)) - self.lineEdit_2.setObjectName("lineEdit_2") - self.label_6 = QtWidgets.QLabel(self.centralwidget) - self.label_6.setGeometry(QtCore.QRect(690, 450, 81, 21)) - font = QtGui.QFont() - font.setPointSize(12) - self.label_6.setFont(font) - self.label_6.setStyleSheet("color: rgb(255, 255, 255);") - self.label_6.setObjectName("label_6") - self.lineEdit_3 = QtWidgets.QLineEdit(self.centralwidget) - self.lineEdit_3.setGeometry(QtCore.QRect(770, 450, 113, 20)) - self.lineEdit_3.setObjectName("lineEdit_3") - self.pushButton_9 = QtWidgets.QPushButton(self.centralwidget) - self.pushButton_9.setGeometry(QtCore.QRect(890, 420, 75, 23)) - font = QtGui.QFont() - font.setPointSize(12) - self.pushButton_9.setFont(font) - self.pushButton_9.setCursor(QtGui.QCursor(QtCore.Qt.PointingHandCursor)) - self.pushButton_9.setStyleSheet("color: rgb(255, 255, 255);\n" -"background-color: rgb(0, 0, 0);\n" -"border-radius:10px;") - self.pushButton_9.setObjectName("pushButton_9") - self.pushButton_10 = QtWidgets.QPushButton(self.centralwidget) - self.pushButton_10.setGeometry(QtCore.QRect(890, 450, 75, 23)) - font = QtGui.QFont() - font.setPointSize(12) - self.pushButton_10.setFont(font) - self.pushButton_10.setCursor(QtGui.QCursor(QtCore.Qt.PointingHandCursor)) - self.pushButton_10.setStyleSheet("color: rgb(255, 255, 255);\n" -"background-color: rgb(0, 0, 0);\n" -"border-radius:10px;") - self.pushButton_10.setObjectName("pushButton_10") - self.pushButton_11 = QtWidgets.QPushButton(self.centralwidget) - self.pushButton_11.setGeometry(QtCore.QRect(890, 480, 75, 23)) - font = QtGui.QFont() - font.setPointSize(12) - self.pushButton_11.setFont(font) - self.pushButton_11.setCursor(QtGui.QCursor(QtCore.Qt.PointingHandCursor)) - self.pushButton_11.setStyleSheet("color: rgb(255, 255, 255);\n" -"background-color: rgb(0, 0, 0);\n" -"border-radius:10px;") - self.pushButton_11.setObjectName("pushButton_11") - self.pushButton_12 = QtWidgets.QPushButton(self.centralwidget) - self.pushButton_12.setGeometry(QtCore.QRect(940, 220, 75, 23)) - font = QtGui.QFont() - font.setPointSize(12) - self.pushButton_12.setFont(font) - self.pushButton_12.setCursor(QtGui.QCursor(QtCore.Qt.PointingHandCursor)) - self.pushButton_12.setStyleSheet("color: rgb(255, 255, 255);\n" -"background-color: rgb(0, 0, 0);\n" -"border-radius:10px;") - self.pushButton_12.setObjectName("pushButton_12") - self.label_7 = QtWidgets.QLabel(self.centralwidget) - self.label_7.setGeometry(QtCore.QRect(680, 220, 131, 21)) - font = QtGui.QFont() - font.setPointSize(12) - self.label_7.setFont(font) - self.label_7.setStyleSheet("color: rgb(255, 255, 255);") - self.label_7.setAlignment(QtCore.Qt.AlignCenter) - self.label_7.setObjectName("label_7") - self.lineEdit_4 = QtWidgets.QLineEdit(self.centralwidget) - self.lineEdit_4.setGeometry(QtCore.QRect(820, 220, 113, 20)) - self.lineEdit_4.setObjectName("lineEdit_4") - self.pushButton_13 = QtWidgets.QPushButton(self.centralwidget) - self.pushButton_13.setEnabled(True) - self.pushButton_13.setGeometry(QtCore.QRect(680, 560, 141, 27)) - sizePolicy = QtWidgets.QSizePolicy(QtWidgets.QSizePolicy.Fixed, QtWidgets.QSizePolicy.Fixed) - sizePolicy.setHorizontalStretch(0) - sizePolicy.setVerticalStretch(0) - sizePolicy.setHeightForWidth(self.pushButton_13.sizePolicy().hasHeightForWidth()) - self.pushButton_13.setSizePolicy(sizePolicy) - font = QtGui.QFont() - font.setPointSize(12) - self.pushButton_13.setFont(font) - self.pushButton_13.setCursor(QtGui.QCursor(QtCore.Qt.PointingHandCursor)) - self.pushButton_13.setStyleSheet("color: rgb(255, 255, 255);\n" -"background-color: rgb(0, 0, 0);\n" -"border-radius:10px;\n" -"") - self.pushButton_13.setCheckable(False) - self.pushButton_13.setAutoDefault(False) - self.pushButton_13.setObjectName("pushButton_13") - self.label_8 = QtWidgets.QLabel(self.centralwidget) - self.label_8.setGeometry(QtCore.QRect(680, 180, 131, 21)) - font = QtGui.QFont() - font.setPointSize(12) - self.label_8.setFont(font) - self.label_8.setStyleSheet("color: rgb(255, 255, 255);") - self.label_8.setAlignment(QtCore.Qt.AlignCenter) - self.label_8.setObjectName("label_8") - self.lineEdit_5 = QtWidgets.QLineEdit(self.centralwidget) - self.lineEdit_5.setGeometry(QtCore.QRect(820, 180, 113, 20)) - self.lineEdit_5.setObjectName("lineEdit_5") - self.pushButton_14 = QtWidgets.QPushButton(self.centralwidget) - self.pushButton_14.setGeometry(QtCore.QRect(940, 180, 75, 23)) - font = QtGui.QFont() - font.setPointSize(12) - self.pushButton_14.setFont(font) - self.pushButton_14.setCursor(QtGui.QCursor(QtCore.Qt.PointingHandCursor)) - self.pushButton_14.setStyleSheet("color: rgb(255, 255, 255);\n" -"background-color: rgb(0, 0, 0);\n" -"border-radius:10px;") - self.pushButton_14.setObjectName("pushButton_14") - self.label_9 = QtWidgets.QLabel(self.centralwidget) - self.label_9.setGeometry(QtCore.QRect(840, 0, 131, 16)) - font = QtGui.QFont() - font.setPointSize(12) - self.label_9.setFont(font) - self.label_9.setStyleSheet("color: rgb(255, 255, 255);") - self.label_9.setObjectName("label_9") - self.label_10 = QtWidgets.QLabel(self.centralwidget) - self.label_10.setGeometry(QtCore.QRect(840, 30, 81, 21)) - font = QtGui.QFont() - font.setPointSize(12) - self.label_10.setFont(font) - self.label_10.setStyleSheet("color: rgb(255, 255, 255);") - self.label_10.setObjectName("label_10") - self.label_11 = QtWidgets.QLabel(self.centralwidget) - self.label_11.setGeometry(QtCore.QRect(840, 60, 81, 21)) - font = QtGui.QFont() - font.setPointSize(12) - self.label_11.setFont(font) - self.label_11.setStyleSheet("color: rgb(255, 255, 255);") - self.label_11.setObjectName("label_11") - self.label_12 = QtWidgets.QLabel(self.centralwidget) - self.label_12.setGeometry(QtCore.QRect(840, 90, 81, 21)) - font = QtGui.QFont() - font.setPointSize(12) - self.label_12.setFont(font) - self.label_12.setStyleSheet("color: rgb(255, 255, 255);") - self.label_12.setObjectName("label_12") - self.label_13 = QtWidgets.QLabel(self.centralwidget) - self.label_13.setGeometry(QtCore.QRect(930, 30, 81, 21)) - font = QtGui.QFont() - font.setPointSize(12) - self.label_13.setFont(font) - self.label_13.setStyleSheet("color: rgb(255, 255, 255);") - self.label_13.setObjectName("label_13") - self.label_14 = QtWidgets.QLabel(self.centralwidget) - self.label_14.setGeometry(QtCore.QRect(930, 60, 81, 21)) - font = QtGui.QFont() - font.setPointSize(12) - self.label_14.setFont(font) - self.label_14.setStyleSheet("color: rgb(255, 255, 255);") - self.label_14.setObjectName("label_14") - self.label_15 = QtWidgets.QLabel(self.centralwidget) - self.label_15.setGeometry(QtCore.QRect(930, 90, 81, 21)) - font = QtGui.QFont() - font.setPointSize(12) - self.label_15.setFont(font) - self.label_15.setStyleSheet("color: rgb(255, 255, 255);") - self.label_15.setObjectName("label_15") - self.pushButton_15 = QtWidgets.QPushButton(self.centralwidget) - self.pushButton_15.setGeometry(QtCore.QRect(630, 30, 51, 23)) - self.pushButton_15.setCursor(QtGui.QCursor(QtCore.Qt.PointingHandCursor)) - self.pushButton_15.setStyleSheet("color: rgb(255, 255, 255);\n" -"background-color: rgb(0, 0, 0);\n" -"border-radius:10px;") - self.pushButton_15.setObjectName("pushButton_15") - self.pushButton_16 = QtWidgets.QPushButton(self.centralwidget) - self.pushButton_16.setGeometry(QtCore.QRect(700, 30, 51, 23)) - self.pushButton_16.setCursor(QtGui.QCursor(QtCore.Qt.PointingHandCursor)) - self.pushButton_16.setStyleSheet("color: rgb(255, 255, 255);\n" -"background-color: rgb(0, 0, 0);\n" -"border-radius:10px;") - self.pushButton_16.setObjectName("pushButton_16") - self.label_16 = QtWidgets.QLabel(self.centralwidget) - self.label_16.setGeometry(QtCore.QRect(630, 0, 131, 21)) - font = QtGui.QFont() - font.setPointSize(12) - self.label_16.setFont(font) - self.label_16.setStyleSheet("color: rgb(255, 255, 255);") - self.label_16.setAlignment(QtCore.Qt.AlignCenter) - self.label_16.setObjectName("label_16") - self.pushButton_17 = QtWidgets.QPushButton(self.centralwidget) - self.pushButton_17.setEnabled(True) - self.pushButton_17.setGeometry(QtCore.QRect(870, 560, 141, 27)) - sizePolicy = QtWidgets.QSizePolicy(QtWidgets.QSizePolicy.Fixed, QtWidgets.QSizePolicy.Fixed) - sizePolicy.setHorizontalStretch(0) - sizePolicy.setVerticalStretch(0) - sizePolicy.setHeightForWidth(self.pushButton_17.sizePolicy().hasHeightForWidth()) - self.pushButton_17.setSizePolicy(sizePolicy) - font = QtGui.QFont() - font.setPointSize(10) - self.pushButton_17.setFont(font) - self.pushButton_17.setCursor(QtGui.QCursor(QtCore.Qt.PointingHandCursor)) - self.pushButton_17.setStyleSheet("color: rgb(255, 255, 255);\n" -"background-color: rgb(0, 0, 0);\n" -"border-radius:10px;\n" -"") - self.pushButton_17.setCheckable(False) - self.pushButton_17.setAutoDefault(False) - self.pushButton_17.setObjectName("pushButton_17") - self.pushButton_18 = QtWidgets.QPushButton(self.centralwidget) - self.pushButton_18.setGeometry(QtCore.QRect(830, 120, 191, 23)) - font = QtGui.QFont() - font.setPointSize(12) - self.pushButton_18.setFont(font) - self.pushButton_18.setCursor(QtGui.QCursor(QtCore.Qt.PointingHandCursor)) - self.pushButton_18.setStyleSheet("color: rgb(255, 255, 255);\n" -"background-color: rgb(0, 0, 0);\n" -"border-radius:10px;") - self.pushButton_18.setObjectName("pushButton_18") - MainWindow.setCentralWidget(self.centralwidget) - self.menubar = QtWidgets.QMenuBar(MainWindow) - self.menubar.setGeometry(QtCore.QRect(0, 0, 1024, 21)) - self.menubar.setObjectName("menubar") - MainWindow.setMenuBar(self.menubar) - self.statusbar = QtWidgets.QStatusBar(MainWindow) - self.statusbar.setObjectName("statusbar") - MainWindow.setStatusBar(self.statusbar) - - self.retranslateUi(MainWindow) - QtCore.QMetaObject.connectSlotsByName(MainWindow) - - def retranslateUi(self, MainWindow): - _translate = QtCore.QCoreApplication.translate - MainWindow.setWindowTitle(_translate("MainWindow", "Slide Scanner - ShanMukha Innovations Pvt Ltd")) - self.label.setText(_translate("MainWindow", "ShanMukha Innovations Pvt Ltd")) - self.label_2.setText(_translate("MainWindow", "Live Preview of Silde")) - self.pushButton.setText(_translate("MainWindow", "Take a Snapshot")) - self.pushButton_2.setText(_translate("MainWindow", "Auto-Focus")) - self.pushButton_3.setText(_translate("MainWindow", "X+")) - self.pushButton_4.setText(_translate("MainWindow", "Y-")) - self.pushButton_5.setText(_translate("MainWindow", "Y+")) - self.pushButton_6.setText(_translate("MainWindow", "X-")) - self.pushButton_7.setText(_translate("MainWindow", "Z - UP")) - self.pushButton_8.setText(_translate("MainWindow", "Z - DOWN")) - self.label_3.setText(_translate("MainWindow", "Slide Movement Controls")) - self.label_4.setText(_translate("MainWindow", "X position")) - self.label_5.setText(_translate("MainWindow", "Z position")) - self.label_6.setText(_translate("MainWindow", "Y position")) - self.pushButton_9.setText(_translate("MainWindow", "Go to X")) - self.pushButton_10.setText(_translate("MainWindow", "Go to Y")) - self.pushButton_11.setText(_translate("MainWindow", "Go to Z")) - self.pushButton_12.setText(_translate("MainWindow", "Set")) - self.label_7.setText(_translate("MainWindow", "Exposure (in ms)")) - self.pushButton_13.setText(_translate("MainWindow", "WSI Scan")) - self.label_8.setText(_translate("MainWindow", "Slide Name")) - self.pushButton_14.setText(_translate("MainWindow", "Set")) - self.label_9.setText(_translate("MainWindow", "Current Positions")) - self.label_10.setText(_translate("MainWindow", "X position")) - self.label_11.setText(_translate("MainWindow", "Y position")) - self.label_12.setText(_translate("MainWindow", "Z position")) - self.label_13.setText(_translate("MainWindow", "0")) - self.label_14.setText(_translate("MainWindow", "0")) - self.label_15.setText(_translate("MainWindow", "0")) - self.pushButton_15.setText(_translate("MainWindow", "40X")) - self.pushButton_16.setText(_translate("MainWindow", "20X")) - self.label_16.setText(_translate("MainWindow", "Magnification")) - self.pushButton_17.setText(_translate("MainWindow", "Best Region Scanning")) - self.pushButton_18.setText(_translate("MainWindow", "Set as Origin")) - - -if __name__ == "__main__": - import sys - app = QtWidgets.QApplication(sys.argv) - MainWindow = QtWidgets.QMainWindow() - ui = Ui_MainWindow() - ui.setupUi(MainWindow) - MainWindow.show() - sys.exit(app.exec_()) - diff --git a/src/python/slide_scanner_test.pyc b/src/python/slide_scanner_test.pyc deleted file mode 100644 index 60844057f70d85d8c57e887b34c07d57ae0523b8..0000000000000000000000000000000000000000 GIT binary patch literal 0 HcmV?d00001 literal 11967 zcmcIqNpsuC6>e(rB3rh`i@e+LI`r7GwR#_qCE2oMYoS1S(|Cph5fIfhMJNC$OH-bz zRC%sB=1T`c+)1l-?DY5sO%JrJB8CO%DaTKQ$i_A4lPU8G;iO9HK@Z=%QVi`D`21 zMJfn_5XbTH-yap?T}G5SXGD>Nj0oC98NqijYpUuLNS)m--nWSi_?CB4NZ+-IcWAha zvKQIzrYaJsRTsBv7w_O}55-yDO9_BF)Rw!Wi+$ofx`&YVQ|riEj|h;wI;{i3-VwS! zD9VS3HZ<>qC>*A;e3+vEF#<=6-g<4l(GeDpi1Ja6?wGK_8-Kg$?|nT0xIqgf1I!z{ zInHj5D{l6%8wA!JxoMCf#79xUKTP8s)nx>RA(QBV-_s2L1mmAj@Dal&!iJB75k9#^ zi<2DasYn-gOI?TNhhj*y1?1sokf#~)v;x^H>?6WHD(qtsWP^~8$Npieg$!8>88Yxs z#Q0|zkokaa!C=u4<+CC<7dwR<_vA@oBh1snJ`?l705~sb7@Qa73&{n>?{^*IU56-N z6t)pMgK$X|K8^6QGCDsGpHJkB$%L!CAGT7BdX5@L<0hO|Cv_tN2AqwCJwI zV;>}7emx~4W#>a4h%%M3eh#5uNzsL$Aw}@tAVsL%T8hw6OA+K&DS{d)x)`SnGE#7< zSqcU?1p`V7J{5MBW~q%HP3AjVv_geiLxl{~&zhkQGU}j$im`d+LsYbAg$lKX3RxQt zkTD#R;Q|?~t~O&e#H@xCR(%awp+zfJP;0Cp1NB-n)L}*)R#4Fc*FVe!TC_riT0?~l z)c$6uBaAwtpbl`q52pGZEn1;Moh&|>fRHs7kilZ88H*dt;)c!wv8P#}MJpCiYp9Tc zIvk^>*0`IDdQ(Bg=o=CC4PoDm#(a2Btlt@L{Xcg`_-`=nQM^s7~OUtk_uh9Z-?!|6Wsk+Nh4=8sn$Z_&MW$uHYk$z)zc9Tlu zeRgwSaf39DZzBwtYGFXu!hj6?hcSLCj4v4f3k4rx06!fDTENYt*iCA^e86rVC~hWr zGz=;?jRsqsWVwf_76#;2^BQVInXF}yLGN)hdZSElRHuh1w@eSF8a>FZ=s~T~gA96; z&FGCWy)m8MgKf}*sYVZSD|%3C^dN)YR5NZtHGIgx|E3wf$@r#@zn%QURKtg?;X?+#72~IF4|&GVEBH&C z|MWvUTC|$=Py;oY^^k#DY=*kPs0#|J-4GQmTA@O%p+W|#6Qic?HP0CJnSzQ~jcwfL zVXEaCvX*Pe4es-(1*_$lRjLP`GppyR1sig_U|$gSM_;hvzrliy+Exp8iDRI>3>s>g zfZVF1phlvS1sk%qU_;gxY{*F2O0$%`;FP^kQY3|47WSL1u4ypU=tFKrA8Ku!K?c1_ zn2n4mzhpki&$+LZpUM|mx2SN%h{GR#+>d`Dpp2pge6GemzpUHw@16%m`L*KnE7pC* z7S-6|>w0bU3umEjk)d}B--xmm$#`3l&$@USF&lKDOkQzF(Sg?_q8-I9dRK7(#l)TK zQ&S5Ig=x3sUhltFUMuV;?4$lw4JF{tK=|`e~_!+Q1MSH&QL)q2zH`iw8EhL zJwffF;#Z_UK?OcS?nU9xp=eIKt1&Yqjs7m*?OJj@+wuB5%a%3&&Ora##@#ONqqUm9 zGFA%$wJ^t)R#|emk0)t5ZML}MrZaD%~T0bP8K$Wf?mc5{tt{ssp4cgw2Yc$fH zHgJA3?ctW}AR>Q8TX~oak}esNZRF;6r2hq}cx=h4^T?Kg{38W1uUibue-oX=#R%uP zQnx|qf7A6hbp4S0wn31$dB7_f9O(a`W(9cY?X4 zvQrFZtyKpvJ~6YLAbj0BB82Do@>|Emh!Nq-%$k^`eFlLBM)d@jCqncS09!0)4~wN!EJ04t7I z@M=!jm~3-yMHWN63AuqLv~0j)()HxG$eC5i2Y7K`TnXsr48?QD3uG~=uJ_}lBTFkt zxQ8f%6`mS?;+`6&fp>zMrYH8A{+VyH)2Vk(`6yH#Y z;Yt&B(nDw2s#OA$#*s-4O#(D&Ei(60K{L}NYG%Cf%*d)-t*wT~6Q=9;DDxn-p~RRp z2FzY6=r(QA>S-RMf{rJcv_6?9sW^oq8kVCKS*l`ggd>`zaY&A5(w)GhmCrP&I7`Jj zD$Y|utE+jDic3^{N=256%T#9Qqf1nH536wML7&N1L2_KIX*vw`8j5J=5=aT z9~t#J7U%OkX{kv+HK`{zuI15GZ~Jf87Hv9nazU)Q>}`To3FTmKekDe zJ(B6~`5YhH*ks z991n&Dhe%Erxb;jlGBPpOX3+tfkRSB97Z$6*=CA!iUMb<5?ALH1rARoiVKS3q^h{6 zC{C%0ON!!jq_FA1oEG0%UXXlRLG$#CYUIN;#OO2fD^_);_GZO0rm9tU-3p{z^^M$m zU`z+LPm6r(7PMWMmg|m@^PF`&eH-qwk(U+Q@o59HV7+k+%g9%)HGc(*B`wLcyX>35 zis$>ZQoX#wU$6SYuTXl~=hLQf5d@#*eA*k*<-@rbvp(%g!XRecb%!<`#yA#P&#n0E z{-v?z`gl@97=*T{i?0%qww;e%BXEtEescXvxnAV0avsMwX~*$s1CDE+V`OF3SoJS6 ztrz(zP9|f8v}ilv)1C_(IFIP%B0d3a>igO0aQ{pG9>h28*=DQ~9>uZiWa6|D8^iK$ zm`(|Sgx!U0p-)Z0$FO{3&XXls&GMcJwc)O4p3b0-uB~Cm%bs|b7w=}Gtz-Deu^@wr z!<+AD3$fsA1iaJco%L3CmCCk}cZ|(8i^?|er|tmx)UAo(EyA4^b#x&P^JDL@OpDTs zzVjz>A+XWt%^ds5|Fg6_@~*W|sA9+z3cN!t6joikR)J`i(15X%fcWa;>>Ev5qUphb zXWEX;?jMD$(^ - - MainWindow - - - Qt::WindowModal - - - - 0 - 0 - 1024 - 768 - - - - - 8 - - - - Slide Scanner - ShanMukha Innovations Pvt Ltd - - - - F:/IITT_Logo/0.jpgF:/IITT_Logo/0.jpg - - - false - - - background-color: rgb(90, 90, 90); - - - - - - 20 - 20 - 50 - 50 - - - - false - - - - - 0 - 0 - 0 - - - - - QGraphicsView::SmartViewportUpdate - - - - - - 80 - 20 - 461 - 51 - - - - - 24 - - - - color: rgb(255, 255, 255); - - - ShanMukha Innovations Pvt Ltd - - - - - - 20 - 180 - 640 - 512 - - - - - 640 - 512 - - - - background-color: rgb(85, 255, 127); - - - - - - 220 - 150 - 221 - 31 - - - - - 18 - - - - color: rgb(255, 255, 255); - - - Live Preview of Silde - - - - - true - - - - 680 - 520 - 141 - 27 - - - - - 0 - 0 - - - - - 12 - - - - PointingHandCursor - - - color: rgb(255, 255, 255); -background-color: rgb(0, 0, 0); -border-radius:10px; - - - - Take a Snapshot - - - false - - - false - - - - - - 870 - 520 - 141 - 27 - - - - - 0 - 0 - - - - - 12 - - - - PointingHandCursor - - - color: rgb(255, 255, 255); -background-color: rgb(0, 0, 0); -border-radius:10px; - - - Auto-Focus - - - - - - 734 - 300 - 51 - 23 - - - - PointingHandCursor - - - color: rgb(255, 255, 255); -background-color: rgb(0, 0, 0); -border-radius:10px; - - - X+ - - - - - - 680 - 330 - 51 - 23 - - - - PointingHandCursor - - - color: rgb(255, 255, 255); -background-color: rgb(0, 0, 0); -border-radius:10px; - - - Y- - - - false - - - true - - - - - - 790 - 330 - 51 - 23 - - - - PointingHandCursor - - - color: rgb(255, 255, 255); -background-color: rgb(0, 0, 0); -border-radius:10px; - - - Y+ - - - - - - 734 - 360 - 51 - 23 - - - - PointingHandCursor - - - color: rgb(255, 255, 255); -background-color: rgb(0, 0, 0); -border-radius:10px; - - - X- - - - - - - 880 - 300 - 75 - 23 - - - - PointingHandCursor - - - false - - - color: rgb(255, 255, 255); -background-color: rgb(0, 0, 0); -border-radius:10px; - - - Z - UP - - - - - - 880 - 360 - 75 - 23 - - - - PointingHandCursor - - - color: rgb(255, 255, 255); -background-color: rgb(0, 0, 0); -border-radius:10px; - - - Z - DOWN - - - - - - 680 - 260 - 181 - 21 - - - - - 0 - 0 - - - - - 12 - - - - color: rgb(255, 255, 255); - - - Slide Movement Controls - - - - - - 770 - 420 - 113 - 20 - - - - - - - 690 - 420 - 81 - 21 - - - - - 12 - - - - color: rgb(255, 255, 255); - - - X position - - - - - - 690 - 480 - 81 - 21 - - - - - 12 - - - - color: rgb(255, 255, 255); - - - Z position - - - - - - 770 - 480 - 113 - 20 - - - - - - - 690 - 450 - 81 - 21 - - - - - 12 - - - - color: rgb(255, 255, 255); - - - Y position - - - - - - 770 - 450 - 113 - 20 - - - - - - - 890 - 420 - 75 - 23 - - - - - 12 - - - - PointingHandCursor - - - color: rgb(255, 255, 255); -background-color: rgb(0, 0, 0); -border-radius:10px; - - - Go to X - - - - - - 890 - 450 - 75 - 23 - - - - - 12 - - - - PointingHandCursor - - - color: rgb(255, 255, 255); -background-color: rgb(0, 0, 0); -border-radius:10px; - - - Go to Y - - - - - - 890 - 480 - 75 - 23 - - - - - 12 - - - - PointingHandCursor - - - color: rgb(255, 255, 255); -background-color: rgb(0, 0, 0); -border-radius:10px; - - - Go to Z - - - - - - 940 - 220 - 75 - 23 - - - - - 12 - - - - PointingHandCursor - - - color: rgb(255, 255, 255); -background-color: rgb(0, 0, 0); -border-radius:10px; - - - Set - - - - - - 680 - 220 - 131 - 21 - - - - - 12 - - - - color: rgb(255, 255, 255); - - - Exposure (in ms) - - - Qt::AlignCenter - - - - - - 820 - 220 - 113 - 20 - - - - - - true - - - - 680 - 560 - 141 - 27 - - - - - 0 - 0 - - - - - 12 - - - - PointingHandCursor - - - color: rgb(255, 255, 255); -background-color: rgb(0, 0, 0); -border-radius:10px; - - - - WSI Scan - - - false - - - false - - - - - - 680 - 180 - 131 - 21 - - - - - 12 - - - - color: rgb(255, 255, 255); - - - Slide Name - - - Qt::AlignCenter - - - - - - 820 - 180 - 113 - 20 - - - - - - - 940 - 180 - 75 - 23 - - - - - 12 - - - - PointingHandCursor - - - color: rgb(255, 255, 255); -background-color: rgb(0, 0, 0); -border-radius:10px; - - - Set - - - - - - 840 - 0 - 131 - 16 - - - - - 12 - - - - color: rgb(255, 255, 255); - - - Current Positions - - - - - - 840 - 30 - 81 - 21 - - - - - 12 - - - - color: rgb(255, 255, 255); - - - X position - - - - - - 840 - 60 - 81 - 21 - - - - - 12 - - - - color: rgb(255, 255, 255); - - - Y position - - - - - - 840 - 90 - 81 - 21 - - - - - 12 - - - - color: rgb(255, 255, 255); - - - Z position - - - - - - 930 - 30 - 81 - 21 - - - - - 12 - - - - color: rgb(255, 255, 255); - - - 0 - - - - - - 930 - 60 - 81 - 21 - - - - - 12 - - - - color: rgb(255, 255, 255); - - - 0 - - - - - - 930 - 90 - 81 - 21 - - - - - 12 - - - - color: rgb(255, 255, 255); - - - 0 - - - - - - 630 - 30 - 51 - 23 - - - - PointingHandCursor - - - color: rgb(255, 255, 255); -background-color: rgb(0, 0, 0); -border-radius:10px; - - - 40X - - - - - - 700 - 30 - 51 - 23 - - - - PointingHandCursor - - - color: rgb(255, 255, 255); -background-color: rgb(0, 0, 0); -border-radius:10px; - - - 20X - - - - - - 630 - 0 - 131 - 21 - - - - - 12 - - - - color: rgb(255, 255, 255); - - - Magnification - - - Qt::AlignCenter - - - - - true - - - - 870 - 560 - 141 - 27 - - - - - 0 - 0 - - - - - 10 - - - - PointingHandCursor - - - color: rgb(255, 255, 255); -background-color: rgb(0, 0, 0); -border-radius:10px; - - - - Best Region Scanning - - - false - - - false - - - - - - 830 - 120 - 191 - 23 - - - - - 12 - - - - PointingHandCursor - - - color: rgb(255, 255, 255); -background-color: rgb(0, 0, 0); -border-radius:10px; - - - Set as Origin - - - - - - - 0 - 0 - 1024 - 21 - - - - - - - - diff --git a/src/python/toQImage.py b/src/python/toQImage.py deleted file mode 100644 index e0243d1..0000000 --- a/src/python/toQImage.py +++ /dev/null @@ -1,27 +0,0 @@ -from PyQt5.QtGui import QImage, qRgb -import numpy as np - -class NotImplementedException: - pass - -gray_color_table = [qRgb(i, i, i) for i in range(256)] - -def toQImage(im, copy=False): - if im is None: - return QImage() - - if im.dtype == np.uint8: - if len(im.shape) == 2: - qim = QImage(im.data, im.shape[1], im.shape[0], im.strides[0], QImage.Format_Indexed8) - qim.setColorTable(gray_color_table) - return qim.copy() if copy else qim - - elif len(im.shape) == 3: - if im.shape[2] == 3: - qim = QImage(im.data, im.shape[1], im.shape[0], im.strides[0], QImage.Format_RGB888); - return qim.copy() if copy else qim - elif im.shape[2] == 4: - qim = QImage(im.data, im.shape[1], im.shape[0], im.strides[0], QImage.Format_ARGB32); - return qim.copy() if copy else qim - -#raise NotImplementedException \ No newline at end of file diff --git a/src/python/toQImage.pyc b/src/python/toQImage.pyc deleted file mode 100644 index 043d3384043b2c0a36317d858419f709eff1475c..0000000000000000000000000000000000000000 GIT binary patch literal 0 HcmV?d00001 literal 1307 zcmbtUOK;Oa5T0G<-3Ab8flB;lA||{+op$ zn@w6d6Kde#?Ln7xD2W+%-Pnt?>tf4nqC`zX+Ll(vltuo6#P-WWzre(w9BbE4ls?>= z@AeBkNn-cC)?d7M{n=XY5R)?E)wHlV2@X7Gr6vNPxO~xaiuh())=k9OfR+`hOD2&+NKRq5$GrusYX5(rv{h= zG4`k_03ppDo8%`RnJ|g+(8D@Im<3Ab$fP?-7J2CI#Y&%P)x$P_*SM90N%p}z4mI8* zWSDscjTT`p8j$(?BrS~njKkjD?Da~98S<8(jrA^vV}cAKo7qf!;~=`4<=c!g@@<)q zb(8e`F$oZhqAu@?Ww9aJVo5HG4rxn9mVOub7>oVl0H3cO;O- wGk3*cnHST2H$AdVSGdSKUYKipnY62%jCSk9UX>UBH9Ita7Z1du>{w6bAMb_)5&!@I